The Glenbrook Hat features a double layer brim and ribbed crown. Over the years, this simple pattern has become one of my favorites because of its versatility. I’ve made many versions with multiple colors; finer yarn; or shorter in length, worn with the brim down for a more relaxed fit.

The hat starts from the brim. Stitches are cast on using a provisional method, then a tube of stockinette stitch is knit. Both ends of the brim are joined to form a hem. The next section of the hat is worked in ribbing with yarns held double. The crown decreases and bind off are then worked in a single yarn.The pattern includes a photo guide of each step, there’s no need to worry if you haven’t tried some of these skills before.

The Glenbrook Scarf is designed for less knitting and more warmth. It is half the length of a traditional winter scarf, but the pull-through channel allows you to easily and securely tie this scarf around your neck. The scarf starts from the loop. Stitches are cast on using Judy’s Magic Cast On and then you knit in stockinette stitch for a bit. Then, the top edge is joined with the cast on edge to form a tube. The remainder of the scarf is worked in ribbing with yarns held double. The edge is finished with a tubular bind off. The pattern includes a photo guide of each step, there’s no need to worry if you haven’t tried some of these skills before.

The Lotus Challenge is a project for knitters with a desire for adventure. It uses the same stitch motif as the Lotus Flower Shawlette, but unlike it’s simpler twin, the pattern is repeated multiple times in rotating colors.

If you are already familiar with stacked increases and decreases, this pattern is a great way to explore their potential for creating intricate shapes and colorwork without stranding or intarsia.

Embrace your adventurous spirit with the Bear Claws knitting pattern, a mesmerizing design that will elevate your wardrobe with its striking chevron and flame stitch motif. This rectangular scarf or wrap, including fringe, measures 14˝ x 82˝ or 23.75˝ x 208 cm, making it a versatile accessory for any occasion. The pattern is suitable for knitters looking to expand their skills and try stacked stitches. With clear written instructions, a stitch map and the option for video tutorials, you'll feel confident tackling this project and creating a stunning piece to showcase your knitting knowledge.

The Stacktangle Blanket will turn your expectations of the well known granny stitch on their head. This pattern uses stacked increases and decreases to turn simple stripes into complex looking colorwork. This isn't much harder than a regular granny stitch afghan, we've provided photo tutorials of the unusual stitches in the pattern.This project can be made in many sizes and is well suited for crocheters who are familiar with basic stitches and are ready to take on some new skills.

Truchet's Cowl is an interactive colorwork pattern based on the work of Designer and mathematician Sébastien Truchet. Each knitter can arrange and create their own unique pattern based on simple 9 x 9 stitch colorwork tiles. 

The Mongolian Inspired Ski Hat is a unisex winter hat inspired by the warm, brightly colored hats that are a trademark of traditional Mongolian dress. The short row brim is contoured to keep ears warm. Photo tutorials for making the overlap in the front of the hat and for the contrasting color welt are included in the pattern.

**** In welt section, work 5 rows as stated in written instructions, not 6 as shown in photos.****

Finished Size:
Newborn - toddler, 18˝ (46 cm),
Child - small adult, 20˝ (51 cm)
Average - large adult, 22” (56 cm)
circumference will stretch up to 3” (8cm).

Yarn: Classic Elite Yarns Jil Eaton Minnow
Merino, 77 yards/100g (70m/100g)
Color A: 1 skein Aqua (Elderberry, Midnight)
Color B: 1 skein Elderberry (Aqua, Lilac)
Color C: 1 skein Blue Bird (Rogue, Chartreuse)

You will not use full skeins of colors A and B in any of the sizes.

Needles: Size 8 (5mm) 16”circular needles Size 8 (5mm) dpns, or size needed to obtain gauge.

Gauge: 16 sts x 20 rows = 4 x 4” (10 x 10 cm) square in stockinette stitch.

Materials: Sewing needle, cable needle, markers.

Inspired by mid-century modern upholstery fabric, this scarf or cowl project takes cues from colorful, mix and match interior design trends of the ‘60s and ‘70s. Stacked stitches and chevron stripes take a pattern often seen in upholstery fabric and housewares and transforms it into a versatile knitting project with many possibilities for color, pattern, and form. Instructions are provided in written and chart form.

This pattern uses the innovative stacked stitch technique seen in the Fox Paws pattern to create the funky chevrons, but it is a less complex pattern to try out if you are a stacked stitch beginner.

When I teach the stacked stitch technique, students ask a lot of questions about design possibilities. The most asked question is about creating 3d fabric with this type of increase and decrease. This cowl is an answer to that question. It uses a similar motif to some of my other patterns, but without the extra shaping which keeps the fabric flat. The stitch creates something like interlocked fingers, a barrel of pickles, or maybe some cuddling cacti.

The Abacus Wrap is a number game within a knitting pattern. There are 6.2619358791105326873282776709998e+98 unique outcomes for this project, so it's unlikely any two knitters will make the exact same scarf. The pattern uses dice to determine the varying lengths of color. The thick and thin striped colorwork is created with a super simple "long stitch" technique. The pattern looks great in fluffy mohair or contrasting colors of basic wool.

Embrace your adventurous spirit with the Bear Claws knitting pattern, a mesmerizing design that will elevate your wardrobe with its striking chevron and flame stitch motif. This rectangular scarf or wrap, including fringe, measures 14˝ x 82˝ or 23.75˝ x 208 cm, making it a versatile accessory for any occasion. The pattern is suitable for knitters looking to expand their skills and try stacked stitches. With clear written instructions, a stitch map and the option for video tutorials, you'll feel confident tackling this project and creating a stunning piece to showcase your knitting knowledge.

Lotus Flower shawlette is inspired by the color and imagery of Tibetan mandalas. The lotus flower rises from the muddy water to create a beautiful and pure flower, a metaphor for the ability to rise above a bad situation or to make something beautiful amid unfavorable circumstances.

If you are already familiar with stacked increases and decreases, this pattern is a great way to explore their potential for creating intricate shapes and colorwork without stranding or intarsia.

If you are new to these techniques, you can find introductory tutorials on youtube:
Knit Tips: How to do Stacked Decreases
Knit Tips: How to Do Stacked Increases
KYOK Demo
Weave in ends as you go:

Finished Size: 50 x 17˝ (127 x 43cm)
Yarn: The Verdant Gryphon Bugga! 412 yards per 4.3 oz. (377 meters per 122 g.)
MC: 350 yards (320 meters) in color Purple Sea Ucrhin
CC: 50 yards (45 meters) in color Golden Poison Frog
or equivalent amount of sport weight yarn

Needles: Size 6 (4mm) 32˝circular needles, or size needed to obtain gauge.

Gauge: 18 sts and 32 rows in stockinette stitch = 4 x 4˝ (10 x 10 cm) square.

Other Materials: Sewing needle, pins, damp cloth, and iron for blocking.

The Stacktangle Blanket will turn your expectations of the well known granny stitch on their head. This pattern uses stacked increases and decreases to turn simple stripes into complex looking colorwork. This isn't much harder than a regular granny stitch afghan, we've provided photo tutorials of the unusual stitches in the pattern.This project can be made in many sizes and is well suited for crocheters who are familiar with basic stitches and are ready to take on some new skills.

This is a shawl of infinite choices.

The stitch pattern is inspired by crayons, melting together into swirls and drips of color. The instructions contain two different stitch patterns which are completely interchangeable. You can choose only one, alternate between the two, or change things up whenever you feel like it. I’ve added photos of some options to show the possibilities.

The pattern uses the stacked stitch technique to create the motif. There are videos showing this technique available on my YouTube channel.

Buffalo plaid is an iconic tartan pattern formed with large blocks of two intersecting colors, typically red and black. This pattern traveled from Scotland to North America in the 1800s and has since become a classic American fabric for winter woolens. Like a woven plaid, the buffalo pattern in this scarf is created with the intersection of 2 colors of yarn.

If you already know 2-color brioche, you may find the intarsia color changes in brioche stitch to be easier than they are in stockinette stitch! Intarsia is added to two-color brioche stitch to create the intermeshed vertical and horizontal stripes of the plaid. This project is a gentle introduction to brioche intarsia.The pattern has written and charted instructions, a brioche intarsia primer with some helpful tips and a photo guide to help you get started on the first few rows.

If you haven’t tried any brioche stitch before, you may want to try a simple project first to learn the terminology.

Finished Size: 78” (198cm) long, 12” (30cm) wide
Yarn: Harrisville Designs Shetland, 217 yards (198 m) per 50g; 100% wool.
Dark Color: 2 skeins Ebony
Light Color: 3 skeins Poppy
Needles: Size 3 (3.25 mm) 32” circular needles or size needed to obtain gauge.
Gauge: 17 sts x 22.5 rows = 4 x 4” (10 x 10 cm) square in brioche stitch.
Materials: A scale accurate to the gram, crochet hook, blocking mats and pins.

Laser Tag is a triangular wrap with an easy short row design. It can be worked in two contrasting colors of yarn or each stripe can be worked in a different color. This pattern works well with yarn scraps and mini-skeins, each color stripe is designed to use less than 20g of yarn. The asymmetrical shaping helps this shawl hug your shoulders and stay put.

I was thinking of the sun, margaritas, and very warm, autumnal shawls when I designed this crescent wrap. I’m even cold in the summer sometimes. Especially after dark, or in late August when the weather starts to shift. Thinking of the summer sun setting as I sit outside with friends, chatting and watching the sky change color - this is when I start to shiver and look for something warm like the sun.

So I drew up a shawl like the setting sun in my sketchbook and knit it up - Solarita is a crescent shaped shawl with a garter stitch base and lacy border. The edge is a faux fringe look with a unique construction. Perfect for spring weather, chilly summer nights, or windy days in autumn.

The Psychedelic Shawl is a twisty, turny flame stitch motif bordered by traditional feather and fan lace. This pattern uses a gradient yarn and stacked stitches to create a unique chevron stripe inspired by rainbow posters of the 1960’s and vintage knitwear.

Videos of the included techniques can be found on my YouTube channel.

Instructions are fully charted and include notes on marker placement.

The Stacktangle Blanket will turn your expectations of the well known granny stitch on their head. This pattern uses stacked increases and decreases to turn simple stripes into complex looking colorwork. This isn't much harder than a regular granny stitch afghan, we've provided photo tutorials of the unusual stitches in the pattern.This project can be made in many sizes and is well suited for crocheters who are familiar with basic stitches and are ready to take on some new skills.

This simple project is a beginner level stacked stitch project that will help you become familiar with the technique. It features stripes of wavy colorwork, a fringed edge, and a dowel for hanging.

What are Stacked Stitches?

The stacked stitch technique is made by piling up increases or decreases on top of each other to create vertical movement within a row. They make unusual shapes in knitting and extremely wavy striped colorwork without strands on the wrong side of the piece.

This pattern contains written instructions and photo guides for the stacked increase, stacked decrease, fringe and finishing.

The Puddle Jumping Cowl started as a short design challenge. Was it possible to design a simple project on a short flight to a teaching job? I didn’t have anything on my needles and had packed a single skein of self striping yarn. Three hours after boarding my flight, I landed with the first few rounds of this cowl finished.

This pattern works best with self striping yarn. The pattern is easy to memorize. It’s only 4 lines long. Markers will help you keep your place in each repeat as you work through the pattern.

This project is good for knitters who have tried increases and decreases and want to learn the Stacked Stitch technique.

These videos will help with the unfamiliar stitches in the pattern:
Stacked Increase
Stacked Decrease

Finished Size: 24, 30, 36” (61, 76, 91cm) in circumference and 14” (35cm) tall.

Yarn: 1 (2, 2) skeins of White Birch Fiber Arts self striping fingering weight yarn, 400 yards per 100g skein; 80% superwash merino, 20% nylon.
Gauge and size can be adjusted to work with any weight yarn.
Pattern contains suggestions for other yarns and weights and substitution guidance.

Needles: Size 4 and 5 (3.5 and 3.75mm) 32”circular needles, or size needed to obtain gauge.

Gauge: 2 stacks wide x 2 stacks high in patt = 3” x 2” (7.6 x 5 cm).

Other Materials: 1 stitch marker, 15+ locking stitch markers in a contrasting color, tapestry needle, pins, damp cloth, ironing board and steamer.

One of the unique and interesting attributes of the shore is the variety of colorfully painted Victorian houses, known as “painted ladies.” The Seashells Shawl is based on these beautiful multicolor houses in the small beach towns along the Jersey shore.

Constructed from the top down, the pattern uses a combination of stacked stitches and short rows to create the shell shapes in the colorwork section. A lace border is then added to edge to finish off the classic look. This pattern can be knit with any multiple of 22 + 5 stitches, so the size can be altered to fit your needs. I’ve also uploaded a coloring page so that you can plan your layout before you begin to knit. I highly recommend taking a look at the wide variety of colors available from Woolbearers, they are great yarns for colorwork and come in harmonious hues.

The Stroopwafel Shawl has a basket weave stitch that reminds me of the Dutch cookie of the same name. The center of the shawl is knit in a woven cabled motif. At the edge of the triangle, the stitch pattern transitions seamlessly into a lacy lattice. The cables create an extra warm, spongy fabric that is sure to keep you warm.

The Winter Wave Hat was a spontaneous project inspired by the arrival of a new family member. I used two 100g skeins of bulky weight yarn in contrasting colors. After knitting the smaller (navy) hat, there was exactly enough yarn left to make a larger hat with the remaining yarn. This project features a simple stacked stitch motif worked in 2 colors in the round.

This scarf was designed for Knit Stars Season 7 as part of the Story of a Swatch Class. The goal of the project was to create a textured scarf that looks good on both sides, lies flat, and uses less than 3 skeins of MollyGirl Yarn Rockstar DK. The resulting scarf combines a wide variety of textured stitches and openwork from the design portion of the class.

The colors in this shawl are inspired by a berry crumble that I ate in Edinburgh. The colors smoothly fade from purple to pink to yellow and look a lot like the berry filling soaking into the top crust of my dessert. The yarn colors do not need to be similar in order to create the fade, the combination of lace, brioche and garter stitch is arranged to blend any shades together. Make sure your yarns have good contrast so that the stitch work is well defined.

My berry crumble recipe is on page 2 of the pattern. This Americanized version of the dessert contains pecans in the topping!

Yes, no hooks were used to make this project. For those of us who love the look of a crocheted afghan or a classic granny square but prefer to knit, this is the way to go. Using a combination of slipped stitches, increases, and decreases, an effect similar to the look of crochet can be achieved.

For some video tutorials on the basic elements of this technique check out this youtube playlist. This pattern requires some knowledge of intermediate knitting techniques, the ability to increase, decrease, and to try new things.

The Boardwalk Top is made for the shore. Knit in a lightweight yarn, the openwork lattice stitch is airy enough to wear all summer over a tank top or as a beach coverup. The stitch motif is inspired by the way the slats of the boardwalk create a geometric pattern of unexpected beauty. Videos of basic lattice knitting techniques can be found online.

Knit in a simple rectangle, after blocking and seaming, the lightweight fabric will curve to fit the shape of your body when worn.

What’s a FADIENT you ask? It’s like a fade and a gradient together, and it’s the best way to slowly blend from one yarn color into to another. The magic happens when you hold multiple strands together for a stunning, painterly effect. It is also a great way to stashbust and experiment with color. The only special tool you need is a scale accurate to the gram.

You don’t need to think about picking the right colors, just find any colors you like - speckled, variegated, solid, anything - I promise they’ll blend smoothly together as you knit this cowl. The proof is in the photos. I started with one aqua skein and one neon orange/pink skein - near opposites on the color wheel. Once knit, it’s almost impossible to tell where the yarns change, it looks like a seamless fade even with these extreme colors.

Finished Size: 24” (61 cm) in circumference and 14” (36 cm) tall.

Yarn: 2 contrasting skeins of Hedgehog Fibres Skinny Singles, 400 yards (366m) per 100g skein; 100% merino.
Shown in one of a kind colors, Color A is blue, Color B is orange.

Needles: #10.5 (6.75 mm) circular needles with a 20” (50 mm) cord.

Gauge: 13 sts x 15 rows = 4 x 4” (10 x 10 cm) square in moss stitch.

Materials: Stitch marker, row counter, and a scale accurate to the gram.

Tattersall is a popular tartan for shirts and blankets. It is characterized by a grid of evenly spaced thin stripes, generally in two alternating colors, on a solid background. This pattern was popularized by blankets from the Tattersall Horse Market in London. Like a woven plaid, the Tattersall pattern in this cowl is created with the intersection of two yarn colors.

If you already know 2-color brioche, you may find the intarsia color changes in brioche stitch to be easier than they are in stockinette stitch! Stripes and intarsia create the intermeshed vertical and horizontal stripes of the plaid. This project is a gentle introduction to brioche intarsia in the round. At first, it’s a little tricky, but this simple plaid is easy to memorize as you focus on the new techniques. The pattern has written and charted instructions, a brioche intarsia primer with some helpful tips and a photo guide to help you get started on the first few rounds.

If you haven’t tried any brioche stitch before, you may want to try a simple project first to learn the terminology.

Finished Size: 26.5” (63 cm) in circumference, 16” (40 cm) tall.
Yarn: Harrisville Designs Shetland, 217 yards (198 m) per 50g; 100% wool.
Main Color: 2 skeins Peacock
Contrast Color 1: 1 skein Gold
Contrast Color 2: 1 skein Raspberry
Needles: Size 3 (3.25 mm) 24” circular needles or size needed to obtain gauge.
Gauge: 18 sts x 26 rows = 4 x 4” (10 x 10 cm) square in brioche stitch.
Materials: A scale accurate to the gram, stitch markers, 20 cardboard or plastic bobbins, a crochet hook, blocking mats and pins.

ParkLife is an easy lace shawl first designed exclusively for shops on the bridge and tunnel tour, spring 2017. Its simple triangular construction paired with a foliage-inspired border are perfect for warm weather knitting. In keeping with the musical theme of MollyGirl Yarn, ParkLife is named for Blur’s 1994 album and hit single of the same name.

Use 1 skein of any MollyGirl fingering weight yarn (or 2 for a large size) in your favorite base to get a classic, sparkly, natural, or fuzzy look.

The Stroopwafel Shawl has a basket weave stitch that reminds me of the Dutch cookie of the same name. The center of the shawl is knit in a woven cabled motif. At the edge of the triangle, the stitch pattern transitions seamlessly into a lacy lattice. The cables create an extra warm, spongy fabric that is sure to keep you warm.

This shawl was designed as a gentle introduction to the stacked stitch technique. Panels of short row lace give the piece it’s asymmetrical look and name. This pattern is well suited for adventurous knitters who are comfortable knitting shawls, but have never tried the stacked stitch technique before. Instructions for pattern modifications and yarn substitution are included in this pattern.

Yes, it’s intarsia, but you shouldn’t feel intimidated by all of the colorwork. The Color Warp Cowl is a hybrid technique that falls somewhere between traditional hand knitting and a commercial method called warp knitting.Each yarn makes a color stripe, zigging and zagging its way to the bottom of the cowl. The method is simple, only using knits and purls to create the zig zag effect. You don’t even have to twist the yarns together as you would in traditional intarsia.

This project was inspired by an African basket made
from repurposed telephone wire. The spiraling design changes directions abruptly creating a rainbow of lightning bolts emanating from the center. The 20g pieces of yarn in each stripe are a good way to use your scraps and it’s best to use at least five colors for this project.

Finished Size: 24.5” (62 cm) in circumference and 18” (41 cm) tall.
Needles: #7, 8, 9, 10 (4.5, 5, 5.5, 6 mm) circular needles with a 16” (40 cm) cord.

Gauge: 18 sts x 36 rows = 4 x 4” (10 x 10 cm) square in garter stitch on smallest needle.

Materials: Stitch marker, tapestry needle, and a scale accurate to the gram.

Optional Materials: 2 bobbins per stripe

Knit on the bias, this bold striped pattern showcases the interplay of a solid color against a shifting ground. In these colors, the scarf reminds me of a busy city highway under construction. The stripes, chevrons, and short rows come together to create a geometric pattern free of any strands on the reverse side, good enough to wear inside out.

This project has 2 sets of instructions with different advantages:
Knit/Purl – the edges are neater when the pattern is worked with some purl rows. In this version, the yarns travel up opposite sides of the work and do not need to break.
All Knit – in this option, long loops are formed from carrying Color B up the side of the work or Color B breaks after each stripe and ends are woven in as you go. There is no purling in this version, but it is not as neat looking.
Sample is worked using knit/purl instructions.

Find helpful video tutorials at http://ow.ly/ZmQz30fB9mA

Finished Size: 9.5” (24 cm) x 74” (188 cm) rhombus shape.
Yarn: Color A - Knitwhits Freia Handpaints Semi-Solid Shawl Ball, 430 yards (393 meters) per 100g skein (100% US cruelty-free merino). Shown in colorway Tobiko.
Color B - Knitwhits Freia Handpaints Flux Shawl Ball, 430 yards (393 meters) per 100g skein (100% US cruelty-free merino). Shown in colorway Punk Rock.
Needles: #6 (4 mm) 24” (60 cm) circular needles for Knit/Purl version, #6 (4 mm) for All Knit version, or size needed to obtain gauge.
Gauge: 22 stitches and 40 rows= 4 x 4” (10 x 10 cm) square in garter stitch after blocking.
Materials: Yarn needle, pins, steamer, blocking wires, blocking surface.

When I teach the stacked stitch technique, students ask a lot of questions about design possibilities. The most asked question is about creating 3d fabric with this type of increase and decrease. This cowl is an answer to that question. It uses a similar motif to some of my other patterns, but without the extra shaping which keeps the fabric flat. The stitch creates something like interlocked fingers, a barrel of pickles, or maybe some cuddling cacti.

The Bonfire Cowl was designed as a way to use up scrap yarn. The chevron pattern was inspired by victorian era flame stitch textiles and bargello motifs. The pattern uses 2 alternating magic balls and is a great way to use up scraps. This method softens the breaks between each color and blends the hues together. It is worked circularly in 2 directions so there’s never any purling.

This multi-color almond shaped wrap is worked from the center out in a garter ridge texture. The shape similar to a pointy oval, I choose to wear and style it like a crescent-shaped shawl but it can be worn as a scarf or a shawl depending on the finished size. Because my sample is knit in thin yarn, it often gets used as a scarf, fitting nicely under my spring coat without too much bulk. In the time between finishing this project and posting the pattern, it is one of my most worn pieces of knitting, largely because I enjoy the colors, but also because of the unusual shape and distinctive beaded picot bind off. This is the first time I have tried knitting with beads, and it has proven to be an easy and useful technique to pick up. Two different methods to work a beaded bind off can be found on my YouTube channel, specifically tailored to fit the bind off of this shawl. The first uses pre strung beads, and the second shows how to add beads as you bind off.

Each town on the Jersey shore has its own Ferris wheel. At night, they are lit up in a rainbow of colors, some even with animated light shows, and can be seen from miles away.

This shawl, worked in two colors is a representation of the flashing lights of the Ferris wheel. It is worked in striped tiers of short rows. These stripes are not just decorative, they actually provide the shaping which creates the semi circular shape of the shawl. This pattern takes color well, so consider knitting each tier in a different color.

Feather Flame is a chevron patterned scarf knit on the bias. It has a scalloped edge and a slight curve that makes it easy to wear. The stitch pattern can be scaled to fit any gauge and yarn weight. Self striping sock yarn gives definition to the waves of the flame stitch pattern.

What’s a FADIENT you ask? It’s like a fade and a gradient together, and it’s the best way to slowly blend from one yarn color to another. The magic happens when you hold multiple strands together for a stunning, painterly effect. It is also a great way to stashbust and experiment with color.

My wrap is knit from 5 random skeins picked up at 5 different yarn shops while road tripping to teach knitting. My goal was to find my favorite skein in each shop and later commemorate my first trip to the Midwest with a giant project, but I didn’t want to worry about how they’d look together. Yes, there were many doubters. Some tried to sway me towards a color family, but I wasn’t interested in playing it safe. I wanted the souvenir of my travels to be as adventurous as the trip itself.

In the end, I love how it turned out, fading from the palest blue with yellow speckles into an olive, lavender, and brown variegated skein. The middle color is a saturated deep blue and green space dyed skein which tied nicely into a deep purple with magenta, teal, and orange speckles. The final color is a sort of orange sherbert alpaca yarn with splashes of pink and a few flecks of darker orange.

So really, if all these oddball colors can blend into one long fadient, what wouldn’t work? It is the ultimate stash buster because you really can throw anything together and it works, just find any colors you like - speckled, variegated, solid, anything - I promise they’ll blend smoothly together as you knit.

Yarn: 4-9 skeins Standard Fingering Weight yarn, 400-440 yards (366-400m) per 100g skein; fiber content varies.

Shown in Mrs. Crosby Train Case - Knit 1 Lincoln, Leading Men Fiber Arts Showstopper - Metamorphosis, Hedgehog Fibres Sock - Medusa, Spotted Dog Merino - Leah, and Faeriegirl Yarns Alpaca - OOAK color.

Final Size varies.

Needles: #10.75 (7mm) needles

Gauge: 13 sts x 20 rows = 4 x 4” (10 x 10 cm) square in moss stitch.

Materials: Stitch Marker, row counter, and a scale accurate to the gram.

Edited by Liz Rolle

The stitch pattern in the shawl reminds me of a flower, growing from a seed into a full bloom. There are three stages of the pattern , each containing different floral motifs. A lot of brioche stitch motifs look like plants and flowers, but the increases and decreases that are needed to make these motifs are not always standard. In every stage, there is an introductory video explaining what types of new stitches and techniques are used and there are individual videos of each stitch instruction. In total, there are over 2 hours of video content to help you learn every increase, decrease, and specific technique in the pattern. The instructions aren’t explained row by row in video

The Trig Wrap is a boomerang shaped shawl made of short row triangles. There’s no sewing or complicated colorwork. Each garter stitch triangle is simple enough to be relaxing, but still holds your interest.

Instructions are for 3 colors, but you can use up to 7 colors. See yardage info below for details on making a 7 color (stash buster) version.

This simple project is a beginner level stacked stitch project that will help you become familiar with the technique. It features stripes of wavy colorwork, a fringed edge, and a dowel for hanging.

What are Stacked Stitches?

The stacked stitch technique is made by piling up increases or decreases on top of each other to create vertical movement within a row. They make unusual shapes in knitting and extremely wavy striped colorwork without strands on the wrong side of the piece.

This pattern contains written instructions and photo guides for the stacked increase, stacked decrease, fringe and finishing.

What’s a FADIENT you ask? It’s like a fade and a gradient together, and it’s the best way to slowly blend from one yarn color into to another. The magic happens when you hold multiple strands together for the smoothest gradient effect that you can create without actually dyeing yarn. It is also a great way to stashbust and experiment with color. The only special tool you need is a scale accurate to the gram.

This shawl is knit with lace weight yarn, something that I like to impulse buy, but never actually knit. With 4 strands held together, the skinny yarn knits up like a DK weight making the project a lot faster to finish. I loved having the freedom to mix and match the colors I like into a gradient instead of having to find one that’s already been put together. You don’t even need to think about picking the right colors, just find any two that you like I promise they’ll blend smoothly together as you knit.

Finished Size: 72” (183 cm) wide and 18” (46 cm) deep.

Yarn: Ball and Skein Ariane, 875 yards (800m) per 100g skein; 70% alpaca 20% silk 10% cashmere.
Shown in Silvery Moon and Candy Hearts.

Needles: #8 (4.5mm) needles

Gauge: 14 sts x 24 rows = 4 x 4” (10 x 10 cm) square in moss stitch.

Materials: Row counter, blocking mats, blocking wires, pins, and a scale accurate to the gram.

This scarf is inspired by shape of some traditional textiles from Uzbekistan. The edges of these elaborately embroidered pieces are often cut on the bias, coming to a point as they overlap. It is shown in 2 weights of yarn, each with slightly different sizes. The fingering weight scarf has more depth and can also be worn like a shawl while the worsted weight version is longer and works well worn around the neck.

Finished Size: 65, 61” (165, 155 cm) long and approx. 15, 17” (38,43 cm) deep scarf. See schematic on page 4 for details.

Yarn: Manos del Uruguay Maxima, approx. 218 yards (199mm) 100g per skein.
or
Baa Ram Ewe Titus, approx. 350 yards (320m) /100g per skein.

Color A: 1 skein Zinnia (Parkin)
Color B: 1 skein Saffron (Yorkstone)
Color C: 1 skein Ion (Aire)

Needles: Size 10 (6mm) / Size 4 (3.5mm) 40” (100 cm) circular needles, or size needed to obtain gauge.

Gauge: 18 (24) sts and 36 (48) rows in garter stitch = 4 x 4? (10 x 10 cm) square.

Other Materials: Marker, 11 stitch holders or scrap yarn, sewing needle, blocking materials optional.

This scarf, knit in two directions,allows much room for creativity.
It can be made with one type of yarn, but is best for color or texture blocking. You can also try something I call comfort blocking - put a soft luxury yarn in places which touch your skin and less touch friendly but fabulous looking yarn on the ends.

Shown in Habu Textiles Shosenshi Paper and
Shalimar Yarns Breathless.

Please note that instructions can be used as a recipe for any weight yarn or stitch gauge.

Recommended yarn:
Yarn A: 1 skein of Habu Textiles A-60 Shosenshi Paper, shown in color 116.
Yarn B: 1 skein of Shalimar Yarns Breathless, shown in color primula.

Gauge Shown:
Yarn A: 37 stitches and 32 rows in a 4”x4” 1 x 1 ribbing square.
Yarn B: 26 stitches and 36 rows in a 4”x4” stockinette square.

Supplies: Size 4 needles (or appropriate to your yarn)
Sewing needle
Stitch marker

Follow these rules for the best results:
Make sure Yarn A is no heavier than Yarn B.
Choose your needle size based on the weight of Yarn B.

The Abacus Wrap is a number game within a knitting pattern. There are 6.2619358791105326873282776709998e+98 unique outcomes for this project, so it's unlikely any two knitters will make the exact same scarf. The pattern uses dice to determine the varying lengths of color. The thick and thin striped colorwork is created with a super simple "long stitch" technique. The pattern looks great in fluffy mohair or contrasting colors of basic wool.

This pattern is for a textured felt lamp shade in multiple sizes and matching pillows in two sizes. The lamp shade can be sewn over a preexisting shade or a handmade frame. DIY instructions for a metal lamp shade frame are included in this pattern as well as a lesson in lamp anatomy and safety. These housewares are a great project for all seasons and add some texture and softness to your decor. If you’ve never wanted to hug a lamp shade or rub a pillow, you might want to after making these.

Pillow Sizes: 10” x 16” and 16” x 16”.

Lampshade fits a 6”-18” diameter drum shade with a height of 11”. The height is also adjustable.

Images of the non knitting sections of the pattern are posted here so that everyone can get a good idea of the skills and materials needed to build the lampshade. These instructions are also included in the pattern PDF. Keep in mind that none of these skills are needed to make pillows or to cover a store bought shade. Please take a look to avoid any unwanted surprises.

You might want to have some experience with short rows before starting this project. This pattern is knit in the round and makes a very nice bag if housewares aren’t your thing.

The cabled scarf is a winter classic because cables are a perfect way to create a thick, warm fabric for cold weather wear. Each side of this scarf has a distinctly different cable motif, yet the pattern is no more difficult to knit than any other cabled pattern.

This twisted cowl is knit flat, then seamed into a spiraling tube. It’s lightweight and airy, but long enough to slouch down into a substantial cowl. The twisted construction allows each color and texture to be seen when worn. There is a photo tutorial to help guide you with the seaming in the pattern.

Finished Size: 26˝ (66 cm) tall and 26 (30)“ (66, 76 cm) in circumference. Shown in smaller size.
Yarn: Neighborhood Fiber Co. Studio Sock, 400 yards (366 m) per 114g. 100% merino)

Color A: 1 skein in pink (approx. 40-45g used)
Color B: 1 skein in teal (approx. 35-40g used)
Color C: 1 skein in purple (approx. 35-40g used)

Needles: Size 5 (3.75 mm) needles, or size needed to obtain gauge.
Gauge: 16 sts x 28 rows = 4 x 4” (10 x 10 cm) square in stockinette stitch.
Other Materials: Tapestry needle, markers, pins, blocking wires (optional).

What’s a FADIENT you ask? It’s like a fade and a gradient together, and it’s the best way to slowly blend from one yarn color into to another. The magic happens when you hold multiple strands together for a stunning, painterly effect. It is also a great way to stashbust and experiment with color. The only special tool you need is a scale accurate to the gram.

This hat is a great fast gift knit. You don’t even need to think about picking the right colors, just find any colors you like - speckled, variegated, solid, anything - I promise they’ll blend smoothly together as you knit. The dark sample shows some of the really rich dark tones from MollyGirl Yarn, but you can see how in the neon colors, the look is completely different. It’s just so much fun to try out different combos to see how they mix.

Finished Size: 18, (21, 24, 26)“ (46, 53, 61, 66 cm) in circumference and 7 (7.25, 8, 9)” (18, 18.5, 20, 23 cm) tall. The 2 smallest sizes use less than 50 grams of each color, so this is a great project for scraps if you don’t mind doing some math to figure out the weights.

Yarn: 2 contrasting skeins of MollyGirl Yarn Rock Star DK, 300 yards (274m) per 100g skein; 100% US spun domestic merino.
Dark hat shown in Angie and Truly Madly Deeply.
Bold hat shown in Dance Rascal Dance and Alive For the First Time.

Needles: #10 (6mm) with a 16” (40 mm) cord and 10.75 (7mm) double pointed needles.

Gauge: 12 sts x 19 rows = 4 x 4” (10 x 10 cm) square in moss stitch.

Materials: Stitch Marker, Row counter, and a scale accurate to the gram.

Edited by Liz Rolle

This unisex honeycomb patterned hat, knit in two-color brioche, reminds me of the intricate carved wooden screens in traditional Middle Eastern art. It has a slouchy fit with a series of eye catching decreases at the crown. Mix it up and flip it inside out for a totally different look of lines and dashes.

It is recommended that you try simple 2 color brioche stitch in the round before starting this project.

The Petal Cowl is designed to highlight the color shifts of a self striping yarn. The stitch shapes are inspired by flower petals, fish scales, and vintage crochet afghans. A great summer knit, or a cold weather project when made in heavy yarn. The extra long chevron motif is created using the Stacked Stitch technique which sets this cowl apart.

If you can handle various types of increases and decreases and circular knitting you can make this cowl.
I also have a YouTube playlist showing the how to do stacked stitches.

The pattern can easily be made larger, smaller, or adjusted to work with heavier yarns (I want one in Kureyon for this winter).

This twisted cowl is knit flat, then seamed into a spiraling tube. It’s lightweight and airy, but long enough to slouch down into a substantial cowl. The twisted construction allows each color and texture to be seen when worn. There is a photo tutorial to help guide you with the seaming in the pattern.

Finished Size: 26˝ (66 cm) tall and 26 (30)“ (66, 76 cm) in circumference. Shown in smaller size.
Yarn: Neighborhood Fiber Co. Studio Sock, 400 yards (366 m) per 114g. 100% merino)

Color A: 1 skein in pink (approx. 40-45g used)
Color B: 1 skein in teal (approx. 35-40g used)
Color C: 1 skein in purple (approx. 35-40g used)

Needles: Size 5 (3.75 mm) needles, or size needed to obtain gauge.
Gauge: 16 sts x 28 rows = 4 x 4” (10 x 10 cm) square in stockinette stitch.
Other Materials: Tapestry needle, markers, pins, blocking wires (optional).

What’s a FADIENT you ask? It’s like a fade and a gradient together, and it’s the best way to slowly blend from one yarn color into to another. The magic happens when you hold multiple strands together for a stunning, painterly effect. It is also a great way to stashbust and experiment with color. The only special tool you need is a scale accurate to the gram.

You don’t need to think about picking the right colors, just find any colors you like - speckled, variegated, solid, anything - I promise they’ll blend smoothly together as you knit this cowl. The proof is in the photos. I started with one aqua skein and one neon orange/pink skein - near opposites on the color wheel. Once knit, it’s almost impossible to tell where the yarns change, it looks like a seamless fade even with these extreme colors.

Finished Size: 24” (61 cm) in circumference and 14” (36 cm) tall.

Yarn: 2 contrasting skeins of Hedgehog Fibres Skinny Singles, 400 yards (366m) per 100g skein; 100% merino.
Shown in one of a kind colors, Color A is blue, Color B is orange.

Needles: #10.5 (6.75 mm) circular needles with a 20” (50 mm) cord.

Gauge: 13 sts x 15 rows = 4 x 4” (10 x 10 cm) square in moss stitch.

Materials: Stitch marker, row counter, and a scale accurate to the gram.

This scarf is inspired by the fun, expressive accessories that you see on the streets of Brooklyn as the weather begins to change. Worked in 2 weights of yarn, it is a perfect way to play with color and use up some single skeins left over after larger projects. Pattern contains photo tutorials to help you tie the fringe.
Finished Size: 70” (177cm) 13” (31cm) not including fringe.

Yarn: Brooklyn Tweed Shelter, 140 yards/50g (128m/50g)
Main Color: 2 skeins Meteorite
Contrast Color: 1 skein Tartan
Brooklyn Tweed Loft, 275 yards/50g (251m/50g)
Fringe Color A: 1 skein Cinnabar (whole skein is not used)
Fringe Color B: 1 skein Hayloft

Needles: Size 8 (5mm) straight needles.

Gauge: 16 sts x 28 rows = 4 x 4” (10 x 10 cm) square in garter stitch.

Other Materials: Sewing needle, crochet hook or latch hook tool, cardboard, scissors.

Inspired by vintage wallpaper, this cowl takes cues from over-the-top colorful interior design trends of the ‘60s and ‘70s and transforms them into a luxurious neck warmer. Stacked stitches and stripes create a geometric colorwork motif to will keep you interested and amazed as the colors come together.

The Scivias shawl is inspired by the dramatic illuminated scenes in Hildegard von Bingen’s text of the same name. The title Scivias comes from the Latin word for knowledge, and this project is designed to build your knowledge of the stacked stitch technique. The shawl begins with a floral center and grows into tiers of flaming chevrons. The border is the most complex section, densely filled with winding rows of color stripes

The center of the shawl is based on a pi shawl formula, the number of chevrons doubles in each tier as you approach the border. If you are familiar with the Fox Paws pattern, the border of this shawl takes the paw motif to another level. You’ll get to knit 3 sizes of paws, each with a different number of rows and stitches.

The Winter Wave Hat was a spontaneous project inspired by the arrival of a new family member. I used two 100g skeins of bulky weight yarn in contrasting colors. After knitting the smaller (navy) hat, there was exactly enough yarn left to make a larger hat with the remaining yarn. This project features a simple stacked stitch motif worked in 2 colors in the round.

This scarf came about after I discovered the incredible Pepperberry Knits Mini Skein Fun Size Bundles. They are not quite enough to make a full scarf, so I also bought a full skein in a harmonious color. I was really looking to make a self indulgent, special yet practical scarf, but the result is just too good to keep for myself.

Of course you can make this scarf in any yarn that you have - the size is easy to adjust - but why not go for the soft and fluffy cashmere?

This scarf is knit in a lattice stitch. Videos of basic lattice knitting techniques can be found online here. Though it is a light and open stitch the cashmere blooms nicely and fills the holes while preserving the interesting texture of the stitches The fringes are made of i-cords giving them a bit of body and a fun unconventional look.

Since each Fun Size Bundle is slightly different, color order is not important, I just tried to mix the colors up as much as possible.

Edited by Liz Rolle
Photos by Beth Shepherd Peters

Finished Size: 8.5” (22cm) wide and 80” (203cm) long rectangle.

Yarn: 1 skein Pepperberry Knits 100% Cashmere Sport Soft Spun Solid, 230 yards (210m) per 50g. Shown in colorway Spring.
1 set (8 mini skeins) Pepperberry Knits Mini Skein Fun Size Bundles Sport, 360 yards (329m) per 80g. Shown in colorway Artist.

Needles: Size 5 (3.75mm) 40” circular needles, or size needed to obtain gauge.

Gauge: 15 sts x 12 rows = 4 x 4” (10 x 10 cm) square in lattice stitch after washing.

Other Materials: Blocking surface, pins, sewing needle.

The Atlantic Ocean Cowl is inspired by the waves and the way light hits the seawater.

This pattern uses drop stitch lace to create a wavy light fabric, perfect to wear as a shoulder warmer on a chilly summer evening on the beach. The Dyers at Nooch Fiber were kind enough to create a special colorway for this pattern called O Trem Azul. It is a perfect deep blue with aqua and indigo highlights to mimic the look of the ocean water.

The boardwalk is the hub of all shore activity. To one side there is beach and ocean, to the other side there are shops, arcades, and
amusement parks. The weathered boards have a distinctive grain, creating a beautiful geometric pattern.

This rectangular scarf is knit in a lattice stitch with mesh and long rows for added texture. Videos of basic lattice knitting techniques can be found online here.The Lattice Knit fabric is so light and airy that you’ll be able to wear this all summer long. It is a great beach knit. You can find this same stitch in the Boardwalk Top.

This scarf brings 3 simple concepts together into a more interesting, but easy to knit, scarf. Stripes provide color contrast; shaping bends the stripes into chevron patterns; and the final addition of short rows changes the thickness of each stripe. As the stripes become thick and thin, the proportion of colors changes,creating a braided look. Consider playing with self striping, ombre, speckled and variegated yarns for a completely different look.The instructions are for a heavy worsted weight yarn, but the pattern can be modified to fit any yarn weight using the following formula.

This pattern is for a textured felt lamp shade in multiple sizes and matching pillows in two sizes. The lamp shade can be sewn over a preexisting shade or a handmade frame. DIY instructions for a metal lamp shade frame are included in this pattern as well as a lesson in lamp anatomy and safety. These housewares are a great project for all seasons and add some texture and softness to your decor. If you’ve never wanted to hug a lamp shade or rub a pillow, you might want to after making these.

Pillow Sizes: 10” x 16” and 16” x 16”.

Lampshade fits a 6”-18” diameter drum shade with a height of 11”. The height is also adjustable.

Images of the non knitting sections of the pattern are posted here so that everyone can get a good idea of the skills and materials needed to build the lampshade. These instructions are also included in the pattern PDF. Keep in mind that none of these skills are needed to make pillows or to cover a store bought shade. Please take a look to avoid any unwanted surprises.

You might want to have some experience with short rows before starting this project. This pattern is knit in the round and makes a very nice bag if housewares aren’t your thing.

The Zipper is a unisex sideways knit scarf with a unique ripple pattern. Inspired by the dots and curves in Aboriginal art, the wave motif provides a great foundation for any color combo. It looks great in dark colors or brights, making it bold or subtle.

This pattern uses stacked increases and decreases for the colorwork. This means that it is very elastic and has no strands on the wrong side. This pattern is a great intro to this colorwork technique if you have never tried it. Videos of stacked increases and decreases are available on YouTube. It is also an excellent warm up pattern if you are working up to knitting Fox Paws.

This project is a gentle introduction to brioche intarsia in the round. The zigzag motif in this cowl reminds me of late winter when the ice on lakes and ponds starts to thaw and crack.

The pattern uses simple brioche increases and decreases alongside the intarsia to shape the flow of color through the cowl. If you already know 2-color brioche, you may find the intarsia color changes in brioche stitch to be easier than they are in stockinette stitch! The stitch pattern is simple and easy to memorize so you can focus on the intarsia technique.

Videos of each increase and decrease used in this pattern are available on YouTube.

If you haven’t tried any brioche stitch before, you may want to try a simple project first to learn the terminology.

Finished Size: 22.5”, 26”, 30” (57, 66, 76 cm) circumference and 15” (38 cm) tall. Shown in smallest size.
Yarn: MollyGirl Yarn Rock Star DK, 270 yards (247 m) per 100g; 100% merino wool.
Light Color 1: 1 skein (55, 60, 65g used) Cold as Ice
Light Color 2: 1 skein (15, 15, 15g used) Pour Some Sugar On Me
Dark Color : 1 skein (70, 80, 90g used) Anything For You
Needles: Size 5 (3.75 mm) 20” circular needles or size needed to obtain gauge.
Gauge: 18 sts x 30 rows = 4 x 4” (10 x 10 cm) square in brioche stitch.
Materials: Stitch marker, crochet hook, steamer and a blocking surface.

This simple pattern is a fun and functional way to test out color choices for any brioche stitch pattern with a color fade. It is the same instruction found in the gauge swatch section of the Blooming Brioche pattern. While working this small project, you’ll learn how to work a slip stitch selvedge and create a color fade in brioche stitch. It contains written and charted instructions and a few video lessons. The pattern makes a coaster or trivet using scrap amounts of fingering weight yarn.

This scarf is inspired by shape of some traditional textiles from Uzbekistan. The edges of these elaborately embroidered pieces are often cut on the bias, coming to a point as they overlap. It is shown in 2 weights of yarn, each with slightly different sizes. The fingering weight scarf has more depth and can also be worn like a shawl while the worsted weight version is longer and works well worn around the neck.

Finished Size: 65, 61” (165, 155 cm) long and approx. 15, 17” (38,43 cm) deep scarf. See schematic on page 4 for details.

Yarn: Manos del Uruguay Maxima, approx. 218 yards (199mm) 100g per skein.
or
Baa Ram Ewe Titus, approx. 350 yards (320m) /100g per skein.

Color A: 1 skein Zinnia (Parkin)
Color B: 1 skein Saffron (Yorkstone)
Color C: 1 skein Ion (Aire)

Needles: Size 10 (6mm) / Size 4 (3.5mm) 40” (100 cm) circular needles, or size needed to obtain gauge.

Gauge: 18 (24) sts and 36 (48) rows in garter stitch = 4 x 4? (10 x 10 cm) square.

Other Materials: Marker, 11 stitch holders or scrap yarn, sewing needle, blocking materials optional.

What’s a FADIENT you ask? It’s like a fade and a gradient together, and it’s the best way to slowly blend from one yarn color into to another. The magic happens when you hold multiple strands together for the smoothest gradient effect that you can create without actually dyeing yarn. It is also a great way to stashbust and experiment with color. The only special tool you need is a scale accurate to the gram.

This shawl is knit with lace weight yarn, something that I like to impulse buy, but never actually knit. With 4 strands held together, the skinny yarn knits up like a DK weight making the project a lot faster to finish. I loved having the freedom to mix and match the colors I like into a gradient instead of having to find one that’s already been put together. You don’t even need to think about picking the right colors, just find any two that you like I promise they’ll blend smoothly together as you knit.

Finished Size: 72” (183 cm) wide and 18” (46 cm) deep.

Yarn: Ball and Skein Ariane, 875 yards (800m) per 100g skein; 70% alpaca 20% silk 10% cashmere.
Shown in Silvery Moon and Candy Hearts.

Needles: #8 (4.5mm) needles

Gauge: 14 sts x 24 rows = 4 x 4” (10 x 10 cm) square in moss stitch.

Materials: Row counter, blocking mats, blocking wires, pins, and a scale accurate to the gram.

The stitch pattern in this cowl looks like safety netting on construction sites or the fabric in sports jerseys. The pointy bandana style looks like a triangle scarf, but stays in place more easily. The point section is worked flat first, then it’s joined in the round, The top edge of the cowl is decreased to create a slight funnel shape. I’ve uploaded an image of the schematic to show the full shape and dimensions..

This pattern is suitable for knitters with knowledge of pattern reading, knitting in the round, increasing, and decreasing. There is one unusual stitch in the pattern but it has a special tutorial on YouTube. View a video tutorial for the 3⇨2 stitch decrease here.
━━━━━━━━━━━━━━━━━━━━━━━━━━
Finished Size: 26” (66 cm) around and 28” (71 cm) from top to point. Info on fit, pattern modifications and yarn substitution are included in the pattern document.
Yarn: Yarn Vibes Inis Sport, 328 yards (300 m) per 100g; 100% Irish wool. Shown in color Shepherd’s Delight. Yarn substitution info is on page 2.
Needles: Size 9 (5.5mm) 24”circular needles, or size needed to obtain gauge.
Gauge: 16.5 sts and 26 rounds in mesh stitch = 4 x 4” (10 x 10 cm) square after washing and blocking.
Other Materials: 1 marker, sewing needle.
━━━━━━━━━━━━━━━━━━━━━━━━━━━
Yarn info for Substitution
This stitch looks best in natural, wooly yarns. During washing these yarns will bloom and soften. If you are wool allergic or prefer synthetic options, look for fibers with a springy texture. Drapey fibers (silk, superwash wool) may distort with time.

Yes, it’s intarsia, but you shouldn’t feel intimidated by all of the colorwork. The Color Warp Cowl is a hybrid technique that falls somewhere between traditional hand knitting and a commercial method called warp knitting.Each yarn makes a color stripe, zigging and zagging its way to the bottom of the cowl. The method is simple, only using knits and purls to create the zig zag effect. You don’t even have to twist the yarns together as you would in traditional intarsia.

This project was inspired by an African basket made
from repurposed telephone wire. The spiraling design changes directions abruptly creating a rainbow of lightning bolts emanating from the center. The 20g pieces of yarn in each stripe are a good way to use your scraps and it’s best to use at least five colors for this project.

Finished Size: 24.5” (62 cm) in circumference and 18” (41 cm) tall.
Needles: #7, 8, 9, 10 (4.5, 5, 5.5, 6 mm) circular needles with a 16” (40 cm) cord.

Gauge: 18 sts x 36 rows = 4 x 4” (10 x 10 cm) square in garter stitch on smallest needle.

Materials: Stitch marker, tapestry needle, and a scale accurate to the gram.

Optional Materials: 2 bobbins per stripe

Everyone knows that unicorns are magical, and so is brioche intarsia colorwork. The stitch patterns in this project are no harder than any other brioche project, but the bright pink pop of color turns this pony into a unicorn!

The magical part is that this intarsia is simpler and easier than plain intarsia. The yarns never have to be linked. If you are already able to work 2 color brioche stitch patterns, this is a great first pattern for the addition of intarsia.

Videos of each increase and decrease used in this pattern are available on YouTube.

If you haven’t tried any brioche stitch before, you may want to try a simple project first to learn the terminology.

Finished Size: 24” (61 cm) circumference and 13” (33 cm) tall.
Each repeat adds 3” (7.5 cm). Shown with 5 repeats of chevron
(green) brioche stitch.
Yarn: Plymouth Yarn Baby Alpaca Grande, 110 yards (101 m)
per 100g; 100% baby alpaca.
BC: 1 skein (90g used) Blue Ice Color 1285
FC 2: 1 skein (75g used) Cactus Color 3317
FC 1: 1 skein (25g used) Coral Color 6010
Needles: Size 10 (6 mm) 16” circular needles or size needed
to obtain gauge.
Gauge: 10.5 sts x 8 rows = 4 x 4” (10 x 10 cm) square in chevron
(green) brioche stitch.
Materials: Stitch marker, crochet hook, steamer, and blocking
mats.

Size Changes
Each added horizontal repeat increases the circumference of the cowl by 3” (7.5 cm). Vertical repeats are 3.5” (9 cm) tall. You’ll need additional skeins of BC and FC1 if you add repeats.

Yarn Substitutions
This pattern is fully adjustable. If you decide to use a thinner yarn, simply add more repeats and work rows 1-8 a few more times. Remember that brioche uses a slightly smaller needle than the size on the label. Fingering - #4, DK - #5, and worsted - #6.

Truchet's Cowl is an interactive colorwork pattern based on the work of Designer and mathematician Sébastien Truchet. Each knitter can arrange and create their own unique pattern based on simple 9 x 9 stitch colorwork tiles. 

What’s a FADIENT you ask? It’s like a fade and a gradient together, and it’s the best way to slowly blend from one yarn color to another. The magic happens when you hold multiple strands together for a stunning, painterly effect. It is also a great way to stashbust and experiment with color.

My wrap is knit from 5 random skeins picked up at 5 different yarn shops while road tripping to teach knitting. My goal was to find my favorite skein in each shop and later commemorate my first trip to the Midwest with a giant project, but I didn’t want to worry about how they’d look together. Yes, there were many doubters. Some tried to sway me towards a color family, but I wasn’t interested in playing it safe. I wanted the souvenir of my travels to be as adventurous as the trip itself.

In the end, I love how it turned out, fading from the palest blue with yellow speckles into an olive, lavender, and brown variegated skein. The middle color is a saturated deep blue and green space dyed skein which tied nicely into a deep purple with magenta, teal, and orange speckles. The final color is a sort of orange sherbert alpaca yarn with splashes of pink and a few flecks of darker orange.

So really, if all these oddball colors can blend into one long fadient, what wouldn’t work? It is the ultimate stash buster because you really can throw anything together and it works, just find any colors you like - speckled, variegated, solid, anything - I promise they’ll blend smoothly together as you knit.

Yarn: 4-9 skeins Standard Fingering Weight yarn, 400-440 yards (366-400m) per 100g skein; fiber content varies.

Shown in Mrs. Crosby Train Case - Knit 1 Lincoln, Leading Men Fiber Arts Showstopper - Metamorphosis, Hedgehog Fibres Sock - Medusa, Spotted Dog Merino - Leah, and Faeriegirl Yarns Alpaca - OOAK color.

Final Size varies.

Needles: #10.75 (7mm) needles

Gauge: 13 sts x 20 rows = 4 x 4” (10 x 10 cm) square in moss stitch.

Materials: Stitch Marker, row counter, and a scale accurate to the gram.

Edited by Liz Rolle

Let your playful side run free this winter with the Paint Drip Scarf. Knit from scraps and leftovers from other worsted weight projects, you can create your own wonderful mess of color. The drip motif uses Stacked Stitches, an innovative method of increasing and decreasing, to create the colorwork. The reverse side has no strands, and the pattern includes a tutorial video showing how to weave in ends as you knit.

What’s a FADIENT you ask? It’s like a fade and a gradient together, and it’s the best way to slowly blend from one yarn color into to another. The magic happens when you hold multiple strands together for a stunning, painterly effect. It is also a great way to stashbust and experiment with color. The only special tool you need is a scale accurate to the gram.

This hat is a great fast gift knit. You don’t even need to think about picking the right colors, just find any colors you like - speckled, variegated, solid, anything - I promise they’ll blend smoothly together as you knit. The dark sample shows some of the really rich dark tones from MollyGirl Yarn, but you can see how in the neon colors, the look is completely different. It’s just so much fun to try out different combos to see how they mix.

Finished Size: 18, (21, 24, 26)“ (46, 53, 61, 66 cm) in circumference and 7 (7.25, 8, 9)” (18, 18.5, 20, 23 cm) tall. The 2 smallest sizes use less than 50 grams of each color, so this is a great project for scraps if you don’t mind doing some math to figure out the weights.

Yarn: 2 contrasting skeins of MollyGirl Yarn Rock Star DK, 300 yards (274m) per 100g skein; 100% US spun domestic merino.
Dark hat shown in Angie and Truly Madly Deeply.
Bold hat shown in Dance Rascal Dance and Alive For the First Time.

Needles: #10 (6mm) with a 16” (40 mm) cord and 10.75 (7mm) double pointed needles.

Gauge: 12 sts x 19 rows = 4 x 4” (10 x 10 cm) square in moss stitch.

Materials: Stitch Marker, Row counter, and a scale accurate to the gram.

Edited by Liz Rolle

This scarf came about after I discovered the incredible Pepperberry Knits Mini Skein Fun Size Bundles. They are not quite enough to make a full scarf, so I also bought a full skein in a harmonious color. I was really looking to make a self indulgent, special yet practical scarf, but the result is just too good to keep for myself.

Of course you can make this scarf in any yarn that you have - the size is easy to adjust - but why not go for the soft and fluffy cashmere?

This scarf is knit in a lattice stitch. Videos of basic lattice knitting techniques can be found online here. Though it is a light and open stitch the cashmere blooms nicely and fills the holes while preserving the interesting texture of the stitches The fringes are made of i-cords giving them a bit of body and a fun unconventional look.

Since each Fun Size Bundle is slightly different, color order is not important, I just tried to mix the colors up as much as possible.

Edited by Liz Rolle
Photos by Beth Shepherd Peters

Finished Size: 8.5” (22cm) wide and 80” (203cm) long rectangle.

Yarn: 1 skein Pepperberry Knits 100% Cashmere Sport Soft Spun Solid, 230 yards (210m) per 50g. Shown in colorway Spring.
1 set (8 mini skeins) Pepperberry Knits Mini Skein Fun Size Bundles Sport, 360 yards (329m) per 80g. Shown in colorway Artist.

Needles: Size 5 (3.75mm) 40” circular needles, or size needed to obtain gauge.

Gauge: 15 sts x 12 rows = 4 x 4” (10 x 10 cm) square in lattice stitch after washing.

Other Materials: Blocking surface, pins, sewing needle.

The stitch pattern in this cowl looks like safety netting on construction sites or the fabric in sports jerseys. The pointy bandana style looks like a triangle scarf, but stays in place more easily. The point section is worked flat first, then it’s joined in the round, The top edge of the cowl is decreased to create a slight funnel shape. I’ve uploaded an image of the schematic to show the full shape and dimensions..

This pattern is suitable for knitters with knowledge of pattern reading, knitting in the round, increasing, and decreasing. There is one unusual stitch in the pattern but it has a special tutorial on YouTube. View a video tutorial for the 3⇨2 stitch decrease here.
━━━━━━━━━━━━━━━━━━━━━━━━━━
Finished Size: 26” (66 cm) around and 28” (71 cm) from top to point. Info on fit, pattern modifications and yarn substitution are included in the pattern document.
Yarn: Yarn Vibes Inis Sport, 328 yards (300 m) per 100g; 100% Irish wool. Shown in color Shepherd’s Delight. Yarn substitution info is on page 2.
Needles: Size 9 (5.5mm) 24”circular needles, or size needed to obtain gauge.
Gauge: 16.5 sts and 26 rounds in mesh stitch = 4 x 4” (10 x 10 cm) square after washing and blocking.
Other Materials: 1 marker, sewing needle.
━━━━━━━━━━━━━━━━━━━━━━━━━━━
Yarn info for Substitution
This stitch looks best in natural, wooly yarns. During washing these yarns will bloom and soften. If you are wool allergic or prefer synthetic options, look for fibers with a springy texture. Drapey fibers (silk, superwash wool) may distort with time.

This project is a gentle introduction to brioche intarsia colorwork. The wavy colorblocking was inspired by the path a skier leaves in the snow as they make their way down a mountain.

If you already know 2-color brioche, you may find the intarsia color changes in brioche stitch to be easier than they are in stockinette stitch! The pattern uses simple brioche increases and decreases to change the ratio of the colors on each side of the wave. The shaping instructions are simple and easy to memorize so you can focus on learning the intarsia technique.

Videos of each increase and decrease used in this pattern are available on YouTube.

If you haven’t tried any brioche stitch before, you may want to try a simple project first to learn the terminology.

Finished Size: 8.5” (21 cm) wide and 60” (152 cm) long.
Yarn: MollyGirl Yarn Harmony, 270 yards (247 m) per 100g; 100% merino wool.
Light Color 1: 1 skein (50g used) Between Halloweens
Light Color 2: 1 skein (50g used) House of the Rising Sun
Dark Color: 1 skein Stop Wondering
-A note on yarn substitution-
Harmony is a chainette yarn. Instead of a traditional twisted construction, it is made of a long chain of knitting. This type of yarn is extra springy, light, and warm. Each skein also contains more yardage than a standard yarn in the same weight.
If you do not use a chainette yarn, get an extra Dark Color skein. You may also need a smaller needle size to obtain gauge.

Needles: Size 10 (6 mm) circular needles or size needed to obtain gauge.
Gauge: 18 sts x 16 rows = 4 x 4” (10 x 10 cm) square in brioche stitch.
Materials: Crochet hook, stitch marker, blocking surface, steamer.

Waves of shifting color radiate from the center point of this shawl in a pulsating pattern. All of the color changes happen automatically due to the self striping yarn, creating an interesting interplay of color as the rows get longer.

This is a knit version of the auras that I see when I have a migraine. Instead of hiding in the dark, I’ve knit this shawl to show what my world looks like on many, painful days.

What’s a FADIENT you ask? It’s like a fade and a gradient together, and it’s the best way to slowly blend from one yarn color into to another. The magic happens when you hold multiple strands together for a stunning, painterly effect. It is also a great way to stashbust and experiment with color. The only special tool you need is a scale accurate to the gram.

For this project I decided to stay with a set of mermaid approved pastels, but you don’t necessarily need to be so coordinated or consistent. Find any colors you like - speckled, variegated, solid, anything - I promise they’ll blend smoothly together as you knit your scarf. Once knit, it’s almost impossible to tell where the yarns change, it looks like a seamless fade because of the stitch so you can pick colors freely.

Finished Size: 8” (20 cm) wide and 70” (177 cm) long.

Yarn: 3 contrasting skeins of Long Dog Yarn Sock, 400 yards (366m) per 100g skein; 80% merino 20% polyamide.
Shown in Poolside, Mermaid Hair, and Foxglove.

Needles: #10.75 (7mm) straight needles.

Gauge: 13 sts x 20 rows = 4 x 4” (10 x 10 cm) square in moss stitch.

Materials: Stitch marker, row counter, and a scale accurate to the gram.

This hat, knit in a self striping yarn, reminds me of ripples on a pond. As the yarn changes, each row builds a new layer of color in a distinctive wavy pattern. Unique shaping methods in the crown create an interesting finish.

This pattern uses stacked increases and decreases for the colorwork. This means the hat is very elastic and has no strands on the wrong side. This pattern uses the color changing properties of Noro Kureyon to create the wavy stripes in this hat. Videos of stacked increases and decreases are available on youtube. It is also an excellent warm up pattern if you are working up to knitting Fox Paws or a Petal Cowl.

Finished Size: 17.5, 20, 22.5” (45, 51, 57 cm) in circumference.
Measurement taken from patterned area, ribbed edge is slightly tighter.

Yarn: 1 (2, 2) skeins Noro Kureyon, 110 yards (101m) per 50g.
Shown in color 201.

Needles: Size 8 (5mm) 16” circular needles and matching set of DPNs, or size needed to obtain gauge.
Size 5 (3.75mm) 16” circular needles

Gauge: 16 sts x 22 rows = 4 x 4” (10 x 10 cm) square in st st on
larger needles.
Other Materials: Tapestry needle.

The Sun Salutation Shawl is a mesmerizing meditation on stacked stitch patterns. Starting with a sun shaped center, each consecutive tier shifts the colors as the shawl expands in a crescent shape. A picot edge finishes the shawl with little rays of light.

This pattern was requested as a companion to the Lotus Challenge with the same stitch motif in a crescent shape.

Ziggy star hat is a unisex beanie with a chevron motif. The uniquely constructed crown comes together in the shape of a star. The Swans Island yarns all seem to coordinate well, and with 2 skeins, you will actually have enough for 2 hats in reversed colors (yardage estimates in pattern are rounded up), making this a great gift knit.

This is a quick project for those experienced with stacked increases and decreases, or a great starter project for those unfamiliar with these techniques. You can see video demos of these stitches on youtube.

This wrap uses a simple four row pattern to create a stunning visual effect. Stripes provide color contrast; shaping bends the stripes into chevron patterns; and the final addition of short rows changes the thickness of each stripe. As the stripes become thick and thin, the proportion of colors changes, creating a herringbone motif. The reverse side looks just as neat as the front because there is no stranding, or slipped stitches. The Ombre Shawl Ball adds just enough color variation to make the stitch look special.

This project has 2 sets of instructions with different advantages:
Knit/Purl – the edges are neater when the pattern is worked with some purl rows. In this version, the yarns travel up opposite sides of the work and do not need to break.
All Knit – in this option, long loops are formed from carrying Color B up the side of the work or Color B breaks after each stripe and ends are woven in as you go. There is no purling in this version, but it is not as neat looking.
Sample is worked using knit/purl instructions.

Find helpful video tutorials for this project at http://ow.ly/ZmQz30fB9mA

Finished Size: 11.5” (29 cm) x 64” (162.5 cm) rectangle.
Yarn: Color A - Knitwhits Freia Handpaints Ombre Shawl Ball, 430 yards (393 m) per 100g skein (100% US cruelty-free merino). Shown in colorway Vamp.
Color B - Knitwhits Freia Handpaints Semi -Solid Shawl Ball, 430 yards (393 m) per 100g skein (100% US cruelty-free merino). Shown in colorway Viridian.
Needles: #6 (4 mm) 24” (60 cm) circular needles for Knit/Purl version, #6 (4 mm) for All Knit version, or size needed to obtain gauge.
Gauge: 22 stitches and 44 rows = 4 x 4” (10 x 10 cm) square in garter stitch after blocking.
Materials: Yarn needle, pins, steamer, blocking wires, blocking surface.

These patterns are designed to teach the Stacked Stitch technique and to help you get comfortable with the increases and decreases.

The Oak Leaf is a fun little introduction to stacked decreases. This technique can be used to create lobe shaped edging, flame stitch motifs, and shaping. You may have seen it in other patterns like Fox Paws which use the wavy stitch in colorwork. Stacked decreases are worked by slipping stitches back to the left needle to work them again.

The stars are a fun way to learn stacked increases. You may have seen these in the Fox Paws patterns and wondered how they work. You can use these fun stars to practice stacked increases before jumping into a more complex project, or just make them because they’re a lot of fun. Stacked increases are worked by slipping stitches back to the left needle to work them again.

This unisex scarf has an extreme chevron motif evoking the image of a forested mountain range with peaks and valleys. Worked in a self striping yarn, this scarf will take on the personality of the any colors you choose, ranging from bright and cheerful to dark and subtle.

The colorwork is done entirely with stacked increases and decreases, the same type of stitches used in the Fox Paws project, at an entry level of difficulty. If you are new to these techniques, you can find introductory tutorials on youtube:
Knit Tips: How to do Stacked Decreases
Knit Tips: How to Do Stacked Increases
KYOK Demo

Finished Size: 11” (28cm) wide and 76” (193cm) long rectangle.

Yarn: 4 x Noro Silk Garden, 137 yards (125m) per 50g. Shown in color 201.

Needles: Size 7 (4.5mm) needles or size needed to obtain gauge.

Gauge: 16 sts x 28 rows = 4 x 4” (10 x 10 cm) square in garter stitch.

Other Materials: Sewing needle.

The whole idea behind this shawl is that it has the look of a granny square or crocheted shawl, but you don’t have to learn how to crochet to make it.

Is it Really Knit?
Yes, no hooks were used to make this project. For those of us who love the look of a classic granny square but prefer to knit, this is the way to go. Using a combination of slipped stitches, increases, and decreases, an effect similar to the look of crochet can be achieved, no hook required.
For some video tutorials on the basic elements of this technique, check out this youtube playlist.

Experiment with color effects by using different types of yarn. Solids show the stitches nicely, but a variegated or speckle yarn can give you a more complex look.

Finished Size: 76 x 20” (92 x 24”) / 193 x 51 (233 x 60) cm triangle.

Yarn: MollyGirl Yarn Rock Star DK, 260 yards (238m) per 100g.
1 x 100g skein, shown in Teenage Dream.
3 (5) x 50g skeins, shown in Pour Some Sugar on Me, Lollypop, and Alive for the First Time.

Needles: Size 7 (4mm) 60” circular needles or size needed to obtain gauge.

Gauge: 22 sts x 8 rows = 4 x 4” (10 x 10 cm) square in lattice pattern.

Other Materials: Tapestry needle, pins, blocking surface, steamer.

At first glance, this cowl appears to have two different sets of stripes, one thick and the other thin. From far away, the thinner stripes seem to exist on top of a layer of thick stripes, almost jumping out in space. Look closer and you will see the two stripe patterns are actually intertwined. The cowl uses short rows as part of the chevron motif to change the scale of each stripe, creating the illusion of multiple patterns.

Find helpful video tutorials for this project at http://ow.ly/ZmQz30fB9mA

What’s a FADIENT you ask? It’s like a fade and a gradient together, and it’s the best way to slowly blend from one yarn color into to another. The magic happens when you hold multiple strands together for a stunning, painterly effect. It is also a great way to stashbust and experiment with color. The only special tool you need is a scale accurate to the gram.

For this project I decided to stay with a set of mermaid approved pastels, but you don’t necessarily need to be so coordinated or consistent. Find any colors you like - speckled, variegated, solid, anything - I promise they’ll blend smoothly together as you knit your scarf. Once knit, it’s almost impossible to tell where the yarns change, it looks like a seamless fade because of the stitch so you can pick colors freely.

Finished Size: 8” (20 cm) wide and 70” (177 cm) long.

Yarn: 3 contrasting skeins of Long Dog Yarn Sock, 400 yards (366m) per 100g skein; 80% merino 20% polyamide.
Shown in Poolside, Mermaid Hair, and Foxglove.

Needles: #10.75 (7mm) straight needles.

Gauge: 13 sts x 20 rows = 4 x 4” (10 x 10 cm) square in moss stitch.

Materials: Stitch marker, row counter, and a scale accurate to the gram.

This fun and easy scarf is knit from the center out to create a unique oval shape with a striped border. The colors used in the sample are UV reactive and glow under blacklight. This is my favorite winter knit to wear this year. It is a simple but distinctive scarf because of the center out construction. Cast on guide video is here.

Fun fact: Allantoid is another word for sausage shaped.

This hat, knit in a self striping yarn, reminds me of ripples on a pond. As the yarn changes, each row builds a new layer of color in a distinctive wavy pattern. Unique shaping methods in the crown create an interesting finish.

This pattern uses stacked increases and decreases for the colorwork. This means the hat is very elastic and has no strands on the wrong side. This pattern uses the color changing properties of Noro Kureyon to create the wavy stripes in this hat. Videos of stacked increases and decreases are available on youtube. It is also an excellent warm up pattern if you are working up to knitting Fox Paws or a Petal Cowl.

Finished Size: 17.5, 20, 22.5” (45, 51, 57 cm) in circumference.
Measurement taken from patterned area, ribbed edge is slightly tighter.

Yarn: 1 (2, 2) skeins Noro Kureyon, 110 yards (101m) per 50g.
Shown in color 201.

Needles: Size 8 (5mm) 16” circular needles and matching set of DPNs, or size needed to obtain gauge.
Size 5 (3.75mm) 16” circular needles

Gauge: 16 sts x 22 rows = 4 x 4” (10 x 10 cm) square in st st on
larger needles.
Other Materials: Tapestry needle.

This project is a gentle introduction to brioche intarsia in the round. The zigzag motif in this cowl reminds me of late winter when the ice on lakes and ponds starts to thaw and crack.

The pattern uses simple brioche increases and decreases alongside the intarsia to shape the flow of color through the cowl. If you already know 2-color brioche, you may find the intarsia color changes in brioche stitch to be easier than they are in stockinette stitch! The stitch pattern is simple and easy to memorize so you can focus on the intarsia technique.

Videos of each increase and decrease used in this pattern are available on YouTube.

If you haven’t tried any brioche stitch before, you may want to try a simple project first to learn the terminology.

Finished Size: 22.5”, 26”, 30” (57, 66, 76 cm) circumference and 15” (38 cm) tall. Shown in smallest size.
Yarn: MollyGirl Yarn Rock Star DK, 270 yards (247 m) per 100g; 100% merino wool.
Light Color 1: 1 skein (55, 60, 65g used) Cold as Ice
Light Color 2: 1 skein (15, 15, 15g used) Pour Some Sugar On Me
Dark Color : 1 skein (70, 80, 90g used) Anything For You
Needles: Size 5 (3.75 mm) 20” circular needles or size needed to obtain gauge.
Gauge: 18 sts x 30 rows = 4 x 4” (10 x 10 cm) square in brioche stitch.
Materials: Stitch marker, crochet hook, steamer and a blocking surface.

This hat, designed for 4 sizes, is a cute and fun gift knit. The crown shaping is done using the innovative stacked stitch technique, then the finished hat is topped off with a special pom-pom topper. This hat is mostly an easy knit, but the stacked stitch section at the crown is best suited for adventurous intermediate knitters.

Finished Size: 16,18, 20, 22” (40.5, 45.5, 51, 56 cm) in circumference.
Hats are designed to be worn with 0-2 in (0-5 cm) of negative ease and will usually fit a toddler (child, teen/small adult, large adult).

Yarn: 2 50g skeins of MollyGirl Yarn Rockstar DK, 150 yards (137m).
1 20g skein MollyGirl Yarn Bass Line, 90 yards (82m).

Needles:#6 (4mm) 16” circular needles and matching set of DPNs, or size needed to obtain gauge.
#4 (3.5mm) 16” circular needles
#7 (4.5mm) dpns (for i-cord pom-pom only)

Gauge: 24 sts x 28 rows = 4 x 4” (10 x 10 cm) square in st st on #6 needles.

Other Materials: 6 stitch markers, tapestry needle, stiff cardboard cut to size.

The Petal Scarf is a flat version of the original Petal Cowl The stitch shapes are inspired by flower petals, fish scales, and vintage crocheted afghans. A great cold weather knit, or a summer project when made in thinner yarn. A unique stitch is used to create an extra long chevron motif which sets this scarf apart.

To watch videos of the Stacked Stitch technique, visit my YouTube channel!

This pattern has information about yarn substitution.

Finished Size: 8” (20cm) wide and 60” (150cm) long. Info on adjusting the size in pattern.
Yarn: 2-3 skeins of Urth Uneek Worsted, 220 yards (192m) per 100g skein; 100% wool. (Shown in color 4007) Info on yarn substitution in pattern.
Needles: Size 8 (5mm) 32” circular needles, or size needed to obtain gauge.
Gauge: 24 sts and 10 rows in patt = 3 x 3” (7.5 x 7.5 cm) rectangle.
Other Materials: Sewing needle, pins, steamer and blocking surface.

Mohair is a luxurious and soft fiber by itself, but adding a touch of cashmere to the mix takes it to the next level while adding warmth for those bone chilling days of winter. Let’s just say, you’ll never experience a scarf this cozy and lightweight in any other yarn. The speckled fade in the Cashmere Merino Lace shines through the bright mohair like a field of wildflowers viewed through rose tinted glasses. There are countless ways to combine the yarns and get a stunning color effect because of that mohair haze. Colors blend together into a beautiful melange with a slow color fade. The softness, and sheerness of mohair create a shimmering quality. You’ll love the effect.

I’ve included a picture of the pure colors that I used for the fade. You can see how they are mellowed in the scarf. Keep this in mind when choosing colors and make sure you like the way the mohair mixes with your Fade Colors.

Advanced beginners and intermediate level knitters will be able to knit this project. There’s no purling, only knitting with a slipped stitch at the selvedge. The colorwork panel may require some concentration at first, but it’s easy to learn and memorize the row instructions.

Finished Size: 16” (41 cm) wide and 72” (183 cm) long.
Yarn: Main Color - 2 skeins (same color) of Hedgehog Fibres Kidsilk
Lace, 459 yards (420 m) per 50g skein; 70% Mohair, 30% Silk.
Shown in Sorry Not Sorry.
Fade Colors - 3 skeins (different colors) of Hedgehog Fibres Cashmere Merino, 328 yards (300 m) per 50g skein; 50% cashmere, 50% merino.
Shown in FC1 - Anemone, FC2 - Piggy Bank, and FC3 - Method.
Needles: #9 (5.5 mm) straight needles.
Gauge: 17 sts x 24 rows = 4 x 4” (10 x 10 cm) square in garter stitch
with 1 strand of Mohair and 2 strands of Cashmere Merino.
Materials: Row counter, tapestry needle, steamer, pins, blocking
surface, and blocking wires.

Hands Entwined is a scarf pattern designed for Handspun Hope, an organization which employs marginalized women and widows in Rwanda. These women hand card, spin and dye organic merino, transforming it from raw wool into knittable yarn. The stacked stitch colorwork in this scarf reminds me of interlocked fingers. It tells the story of handmade materials turned into handknit goods.
Pattern Info

The asymmetrical pattern is formed using stacked stitches, a colorwork technique which is best suited for intermediate level knitters with an understanding of increases and decreases. Video Tutorials are available for some sections of the instructions. There are also instructions to make a cowl version and a longer scarf in this motif included in the pattern.

Finished Size: 11.5” (22cm) wide and 54” (162cm) long.
Yarn: Handspun Hope Organic Merino Wool Yarn, approx. 185 yards/100g (170m/100g) per skein.
Main Color: Rich Topiary (Approx. 60g used)
Color A: Eucalyptus Bark (Approx. 100g used)
Color B: Natural (Approx. 100g used)
Color C: Onion Skin (Approx. 100g used)
Needles: Size 9 (5.5mm) 40”circular needles, or size needed to obtain gauge.
Gauge: 16 sts x 28 rows = 4 x 4” (10 x 10 cm) square in garter stitch.
Other Materials: Stitch markers, locking stitch markers in 2 colors, tapestry needle, blocking surface, pins.

My mother requested that I make her a light, soft and warm shawl to cover her shoulders. I set out to find a pattern. Then the obvious occurred to me to ask my daughter, a designer, to create a pattern for her grandmother. I told her that I wanted it to be simple to knit and chic enough to wear out. It had to wrap around her shoulders and stay put, even if worn without a brooch to secure the ends.

A marled grey yarn, which perfectly complemented her interests in graphic arts, architecture, and black and white photography, makes up the body of the shawl. The solid black border with just a hint of silky shine perfectly finishes off the edge.

This wrap uses a simple four row pattern to create a stunning visual effect. Stripes provide color contrast; shaping bends the stripes into chevron patterns; and the final addition of short rows changes the thickness of each stripe. As the stripes become thick and thin, the proportion of colors changes, creating a herringbone motif. The reverse side looks just as neat as the front because there is no stranding, or slipped stitches. The Ombre Shawl Ball adds just enough color variation to make the stitch look special.

This project has 2 sets of instructions with different advantages:
Knit/Purl – the edges are neater when the pattern is worked with some purl rows. In this version, the yarns travel up opposite sides of the work and do not need to break.
All Knit – in this option, long loops are formed from carrying Color B up the side of the work or Color B breaks after each stripe and ends are woven in as you go. There is no purling in this version, but it is not as neat looking.
Sample is worked using knit/purl instructions.

Find helpful video tutorials for this project at http://ow.ly/ZmQz30fB9mA

Finished Size: 11.5” (29 cm) x 64” (162.5 cm) rectangle.
Yarn: Color A - Knitwhits Freia Handpaints Ombre Shawl Ball, 430 yards (393 m) per 100g skein (100% US cruelty-free merino). Shown in colorway Vamp.
Color B - Knitwhits Freia Handpaints Semi -Solid Shawl Ball, 430 yards (393 m) per 100g skein (100% US cruelty-free merino). Shown in colorway Viridian.
Needles: #6 (4 mm) 24” (60 cm) circular needles for Knit/Purl version, #6 (4 mm) for All Knit version, or size needed to obtain gauge.
Gauge: 22 stitches and 44 rows = 4 x 4” (10 x 10 cm) square in garter stitch after blocking.
Materials: Yarn needle, pins, steamer, blocking wires, blocking surface.

This scarf is the best place to start if you are new to the stacked stitch technique. There are no ends to weave in because it is worked in self striping yarn. It has many markers to guide you through each row and the pattern is very forgiving of mistakes. If you have your eye on a complex pattern like Fox Paws, or the Lotus Challenge Shawl but want to start with something less daunting, this is the project for you.

I’ve made my scarf very long and narrow. It reminds me of the skinny scarves in the Missoni F/W 16 collection. This is a favorite accessory when paired with some 70s style clothes and mustard colored platforms, it just makes me feel tall and fashionable.

If you aren’t into the long skinny scarf or want to use a thinner yarn, there are instructions to change the width in the pattern. There are also helpful tips and a note on how to work this scarf in a solid colored yarn.

If you can get through this scarf, you’ll be ready to take on even the hardest of stacked stitch patterns.

Finished Size: 7.5 x 86” (19 x 218 cm) rectangle incl. “lobes”.
Yarn: 3 skeins Noro Kureyon Air, 109 yards (100m) per 100g. Shown in color 263.
Needles: Size 15 (10mm) 24” circular needles or size needed to obtain gauge.
Gauge: 3 rows in patt = 7.5 x 9” (19 x 23 cm) including “lobes”
Other Materials: 5 stitch markers, Tapestry needle.

The Hudson Valley is one of the most beautiful places in the United States. In the autumn, people come from all over the world to see the colorful foliage, enjoy the mild weather, and to relax in nature.

Skills
This pattern contains increases, decreases, slipped stitches, lacework and stacked stitches. If you have never tried stacked stitches, it is a good idea to look at this online video tutorial:
Stacked Increase Video
Stacked Decrease Video
Some clues may have their own video guides to help you out. These will be posted as the clues are released.

Finished Size: 84” (213 cm) wide x 23” (58 cm) deep crescent shape.

Yarn: Jill Draper Makes Stuff Mohonk, 370 yards (338 m) per 4 oz skein; 100% wool.
3 contrasting color skeins

Needles: Size 8 (5mm) needles, or size needed to obtain gauge.

Gauge: 14 sts x 22 rows = 4 x 4” (10 x 10 cm) square in stockinette stitch.

Picking yarn
You will need sport or DK weight yarn in three colors. I recommend using the recommended Mohonk yarn from Jill Draper Makes Stuff.

Color A is your pop color. Whether you pick a highlight or lowlight, this is the color that should contrast with both Colors B and C. You will only need half a skein of this color.

Color B is your secondary color. it should be harmonious with Color C, but not too close to it. A solid color is best.

Color C is the star of the show. Though I prefer solid colors all around, this is where you may want to use a mildly variegated yarn. Make sure you like this color a lot, it’s the one we’ll be using most.

This cowl, worked in an extreme wave pattern, gives a unique look to any self striping yarn. The tweed texture of the Noro Koromo yarn and bright colors remind me of an impressionist painting where blooming flowers are reflected in the ripples of a garden pond. The shape is slightly tapered for a better fit and can be worn up over the ears in cold weather.

The colorwork is done entirely with stacked increases and decreases, the same type of stitches used in the Fox Paws project, at an entry level of difficulty. If you are new to these techniques, you can find introductory tutorials on youtube:
Knit Tips: How to do Stacked Decreases
Knit Tips: How to Do Stacked Increases
KYOK Demo

Yarn: 2 x Noro Koromo, 137 yards (125m) per 50g. Shown in color 3.

Needles: Size 8 (5mm) 24” circular needles, or size needed to obtain gauge.

Gauge: 16 sts x 30 rows = 4 x 4” (10 x 10 cm) square in garter stitch.

Other Materials: Marker, sewing needle.

Limestone is a cowl with a reversible slip stitch pattern that
creates a striped pattern on one side and a nearly solid color on
the other.

Yarn: 2 contrasting skeins of Manos del Uruguay Maxima (shown
in colors highlighter and foil) or another worsted weight yarn.

Needles: Size 9 (5.5 mm) circular needles 24”

Other Materials: A sewing needle, a stitch marker.

Gauge: 18 stitches and 36 rows for a 4” square of pattern stitch.

Finished Size: 44” around and 7.5” tall.

Worked in a lightweight “faux crochet” stitch, this shawl is a fun, colorful project with a variety of interesting new stitch motifs. The recipe is fully adjustable to accommodate whatever yarns and colors you have available to you. The finished shawl, worked in the recommended yarns, weighs only 85 grams. A little yarn will take
you a long way.

Worked in yellow, orange, green, and pink, my shawl reminds me of a delicious taco topped with pico de gallo, cabbage slaw, and cheddar cheese.

Finished Size: 64” (163 cm) wide and 16” (40 cm) deep crescent shape.
Yarn: Woolbearers Fingering wool, 273 yards (250m) per 50g.
One 50g skein MC and CCA. Shown in Lemon Drop and Key Lime
One mini skein in CCB and CCC. Shown in Fuchsia and Cantaloupe
Needles: Size 5 (3.75mm) 40” circular needles or size needed to obtain gauge.
Gauge: 22 sts x 40 rows = 4 x 4” (10 x 10 cm) square in garter stitch.
Other Materials: Tapestry needle, pins, blocking surface.

Modify This Recipe
The instructions for this shawl can be altered to fit your needs, whether that means changing the weight of the yarn, changing the number of colors, or changing how wide the border is. Use Recipe Notes (in grey) under each row to see how this pattern can be modified. An introduction to the Faux Crochet techniques used in this shawl is shown in these videos.

Manor House is a shawl style cardigan for kids and adults. It features raglan sleeves, a lacy contrast color edge, and a draped and contoured front that can be worn many ways. It looks great with a tee and jeans, or worn as a wrap over a summer dress.

Instructions include a short sleeve and 3/4 sleeve version.

Yarn: Mrs. Crosby Train Case, 425 yards per 3.5 oz. (389 meters per 100 g.) skein.

Children’s Sizes: 4 (6, 8, 10, 12, 14)
Cross Back: 12.5 (14, 14.5, 15.5, 16, 16.5) in, 32.5 (35, 37.5, 39, 41, 41.5) cm
Length: 9.5 (10, 12.5, 14, 15, 15.5) in, 24 (26, 32, 36, 37.5, 39.5) cm
Yardage for Short and Long Sleeve versions: MC - 1 (1, 2, 2, 2, 2), CC - 1 (1, 1, 1, 1, 1).

Lady’s Sizes: 31 (34, 37, 40, 43, 46, 49, 52)
Cross Back: 17 (18.5, 19.5, 21, 22.5, 24, 26, 27) in, 42.5 (47.5, 49.5, 53.5, 57, 60.5, 66.5, 68.5) cm
Length: 16.5 (16.5, 16, 16.5, 16.5, 16.5, 17, 17, 16.5) in, 42 (42, 41.5, 42, 42, 42.5, 43, 42) cm
Yardage for Short Sleeve version: MC - 2 (2, 2, 2, 3, 3, 3, 3), CC - 1 (1, 1, 1, 1, 1, 1, 1).
Yardage for Long Sleeve version: MC - 3 (3, 3, 3, 3, 3, 3, 3), CC - 1 (1, 1, 1, 1, 1, 1, 1).

Needles: Size 4 (3.5mm) 32”circular needles, or size needed to obtain gauge.

Gauge: 28 sts x 36 rows = 4 x 4” (10 x 10 cm) square in stockinette stitch.

Other Materials: Markers, holders or scrap yarn, sewing needle, steamer, blocking surface, pins

The Petal Scarf is a flat version of the original Petal Cowl The stitch shapes are inspired by flower petals, fish scales, and vintage crocheted afghans. A great cold weather knit, or a summer project when made in thinner yarn. A unique stitch is used to create an extra long chevron motif which sets this scarf apart.

To watch videos of the Stacked Stitch technique, visit my YouTube channel!

This pattern has information about yarn substitution.

Finished Size: 8” (20cm) wide and 60” (150cm) long. Info on adjusting the size in pattern.
Yarn: 2-3 skeins of Urth Uneek Worsted, 220 yards (192m) per 100g skein; 100% wool. (Shown in color 4007) Info on yarn substitution in pattern.
Needles: Size 8 (5mm) 32” circular needles, or size needed to obtain gauge.
Gauge: 24 sts and 10 rows in patt = 3 x 3” (7.5 x 7.5 cm) rectangle.
Other Materials: Sewing needle, pins, steamer and blocking surface.

Skillz
This pattern contains increases, decreases, and stacked stitches suitable for intermediate and experienced knitters with a penchant for adventure. If you have never tried these stitches, it is a good idea to look at these online video tutorials:
Stacked Increase Video
Stacked Decrease Video
Some clues will have their own video guides to help you out. These will be posted as the clues are released. A help/spoilers thread will also be started for each clue as they are released so that everyone can ask questions and stay on track.

yarn
You will need fingering weight yarn in two colors. I recommend using Sophia from Ball and Skein. You can purchase directly from their website or you can find them at various fiber shows across New England. They are going to be in Vernon, CT on April 30th and I hope to see you all there.

This beret came into existence the week of the Halloween snow storm. My sister asked me to make her a hat, and I decided to make a design project of it. I wanted whatever I made to look good with her curly brown hair. She’s the kind of person who has three young kids and magically white sofas, and a really nicely decorated house. She likes details, and is always understated but never dull.

I know that she doesn’t like over designed things, so I left most of the hat plain, with a cabled crown that also functions as the decrease section of the pattern.

October Snow is best for a knitter who has made a cable project before.

This pattern uses stacked increases and decreases to create the wavy colorwork. This means that it is very elastic and has no strands on the wrong side. This pattern is a great intro to this technique if you have never tried it. Videos of stacked increases and decreases are available on youtube. A video for the special 3-7 increase is also available.

If you aren’t sure about your color choices and feel a little lost, print out the coloring page and try them out. It’s a great planning tool.

Finished Size: 72” x 14˝ (182 x 35 cm)
Yarn: Woolbearers Fingering Wool, 273 yards (250 m) per 50 g.
Main Color: 2 skeins, shown in Lemon Drop.
Contrast Color A: 1 skein, shown in Key Lime.
Contrast Color B: 1 skein, shown in Fuchsia.
Contrast Color C: 1 skein, shown in Canteloupe.
Contrast Color D: 1 skein, shown in Iris.
Kits are available via Woolbearers

Needles: Size 5 (3.75 mm) 24˝ circular needles, or size needed to obtain gauge.
Gauge: Swatch in patt starting with 29 sts. Rep Rows 1-22 only twice and bind off. Swatch should measure 11” x 5˝ (28 x 13 cm) after blocking.
Other Materials: Stitch markers, sewing needle, blocking surface, pins.

The whole idea behind this shawl is that it has the look of a granny square or crocheted shawl, but you don’t have to learn how to crochet to make it.

Is it Really Knit?
Yes, no hooks were used to make this project. For those of us who love the look of a classic granny square but prefer to knit, this is the way to go. Using a combination of slipped stitches, increases, and decreases, an effect similar to the look of crochet can be achieved, no hook required.
For some video tutorials on the basic elements of this technique, check out this youtube playlist.

Experiment with color effects by using different types of yarn. Solids show the stitches nicely, but a variegated or speckle yarn can give you a more complex look.

Finished Size: 76 x 20” (92 x 24”) / 193 x 51 (233 x 60) cm triangle.

Yarn: MollyGirl Yarn Rock Star DK, 260 yards (238m) per 100g.
1 x 100g skein, shown in Teenage Dream.
3 (5) x 50g skeins, shown in Pour Some Sugar on Me, Lollypop, and Alive for the First Time.

Needles: Size 7 (4mm) 60” circular needles or size needed to obtain gauge.

Gauge: 22 sts x 8 rows = 4 x 4” (10 x 10 cm) square in lattice pattern.

Other Materials: Tapestry needle, pins, blocking surface, steamer.

This unisex scarf has an extreme chevron motif evoking the image of a forested mountain range with peaks and valleys. Worked in a self striping yarn, this scarf will take on the personality of the any colors you choose, ranging from bright and cheerful to dark and subtle.

The colorwork is done entirely with stacked increases and decreases, the same type of stitches used in the Fox Paws project, at an entry level of difficulty. If you are new to these techniques, you can find introductory tutorials on youtube:
Knit Tips: How to do Stacked Decreases
Knit Tips: How to Do Stacked Increases
KYOK Demo

Finished Size: 11” (28cm) wide and 76” (193cm) long rectangle.

Yarn: 4 x Noro Silk Garden, 137 yards (125m) per 50g. Shown in color 201.

Needles: Size 7 (4.5mm) needles or size needed to obtain gauge.

Gauge: 16 sts x 28 rows = 4 x 4” (10 x 10 cm) square in garter stitch.

Other Materials: Sewing needle.

Lime Nut muffins are my favorite recipe from the Northwood Inn. They are very flavorful and rich, yet the tart citrus gives them a slightly tropical flavor that tastes like a summer vacation. The Lime Nut cowl features a unique spring stitch texture and tapered fit. A step by step spring stitch tutorial is included in the pattern and a video tutorial is available via youtube.

Finished Size: 13˝ tall (33 cm) and 26˝ tapering to 22”
(66-56 cm) in circumference
Yarn: Main Color: 1 skein Nooch Central Park Fingering, 400 yds (366 m) per 100g Shown in Brasil, Brasil.
Needles: Size 5 (3.75 mm) 24˝ circular needles,
Gauge: 22 sts x 28 rows = 4 x 4” (10 x 10 cm) square in stockinette stitch.
Other Materials: Stitch marker, tapestry needle.

Gillian’s Wonderland Pier is a local landmark in Ocean City. It’s facade with red and white towers is iconic, reminding many generations of their youth spent at the shore.

Worked in 3 colors, this crescent shaped shawl uses short rows to create a simple colorwork motif which provides a transition between the crescent and the wavy lace border.

Finished Size: 60” (152 cm) wide and 17” (43 cm) deep crescent.
Yarn: Color A: 1 skein Spun Fiber Co. Luna Sport 100% local Merino, 350 yards (320 m) per 100g. Shown in Jadeite.
Color B: 1 skein Spun Fiber Co. Luna Sport 100% local Merino, 350 yards (320 m) per 100g. Shown in Crimson. Full skein is not used.
Color C: 1 skein Spun Fiber Co. Luna Sport 100% local Merino, 350 yards (320 m) per 100g. Shown in Natural.
Needles: Size 6 (4 mm) 40” circular needles, or size needed to obtain gauge.
Gauge: 18 sts x 36 rows = 4 x 4” (10 x 10 cm) square in garter stitch after blocking.
Other Materials: Blocking surface, blocking wires, pins.

This dishcloth or washcloth is a fun representation of the daily weather. It is is great bath toy for the kids, and possibly a fun way to convince them to help out with the dishes, Well, that might be wishful thinking. Knit from the center out, the shape is knit in 2 colors with a stockinette center and a garter stitch border to keep the edges flat.
Videos for stacked increases are available on youtube. A photo tutorial of the cast on is also included in the pattern.

Finished Size: 6.5” (16.5 cm) wide and 11” (28 cm) tall.
Yarn: MC - Lily Sugar’n Cream Solids, 120 yards (110m) per 2.5 oz; 100% cotton. Shown in color 1201 Sea Breeze.
CC - Lily Sugar’n Cream Solids, 120 yards (110m) per 2.5 oz; 100% cotton. Shown in color 1742 Hot Blue.
Needles: Size 7 (4.5mm) double pointed needles (set of 5) and
Size 7 (4.5mm) 16” (40 cm) circular needles or size needed to obtain gauge.
Gauge: 18 sts and 28 rows for a 4 x 4” (10 x 10cm) square in stockinette stitch.
Other Materials: Sewing needle.

Mohair is a luxurious and soft fiber by itself, but adding a touch of cashmere to the mix takes it to the next level while adding warmth for those bone chilling days of winter. Let’s just say, you’ll never experience a scarf this cozy and lightweight in any other yarn. The speckled fade in the Cashmere Merino Lace shines through the bright mohair like a field of wildflowers viewed through rose tinted glasses. There are countless ways to combine the yarns and get a stunning color effect because of that mohair haze. Colors blend together into a beautiful melange with a slow color fade. The softness, and sheerness of mohair create a shimmering quality. You’ll love the effect.

I’ve included a picture of the pure colors that I used for the fade. You can see how they are mellowed in the scarf. Keep this in mind when choosing colors and make sure you like the way the mohair mixes with your Fade Colors.

Advanced beginners and intermediate level knitters will be able to knit this project. There’s no purling, only knitting with a slipped stitch at the selvedge. The colorwork panel may require some concentration at first, but it’s easy to learn and memorize the row instructions.

Finished Size: 16” (41 cm) wide and 72” (183 cm) long.
Yarn: Main Color - 2 skeins (same color) of Hedgehog Fibres Kidsilk
Lace, 459 yards (420 m) per 50g skein; 70% Mohair, 30% Silk.
Shown in Sorry Not Sorry.
Fade Colors - 3 skeins (different colors) of Hedgehog Fibres Cashmere Merino, 328 yards (300 m) per 50g skein; 50% cashmere, 50% merino.
Shown in FC1 - Anemone, FC2 - Piggy Bank, and FC3 - Method.
Needles: #9 (5.5 mm) straight needles.
Gauge: 17 sts x 24 rows = 4 x 4” (10 x 10 cm) square in garter stitch
with 1 strand of Mohair and 2 strands of Cashmere Merino.
Materials: Row counter, tapestry needle, steamer, pins, blocking
surface, and blocking wires.

Royal Icing is a crescent shaped shawl inspired by decorated sugar cookies. Most of this shawl is garter stitch, stockinette or simple lace, making it perfect for TV or travel knitting. The border uses a combination of stacked stitches and bind-off techniques to create interesting color stripes and openwork.

Finished Size: 17” deep and 76” wide crescent.
Yarn: Lux Adorna Cashmere Sport, 230 yards (210m) per 50g; 100% cashmere.
Color A - 1 skein (approx. 42g used) Shown in Sorbet
Color B - 1 skein (approx. 35g used) Shown in Persimmon
Color C - 1 skein (approx. 45g used) Pillow Talk
Needles: Size 6 (4mm) 32-40” circular needles, or size needed to obtain gauge.
Gauge: 17 stitches and 34 rows for a 4” (10cm) square of garter stitch after blocking.
Other Materials: Tapestry needle, pins, blocking surface.

Info for Yarn Substitution

This pattern is written for sport weight yarn. If you cannot find a sport weight yarn, choose a fingering weight yarn. You should not need to change needle size unless your yarn is a very thin fingering weight.

Everyone knows that unicorns are magical, and so is brioche intarsia colorwork. The stitch patterns in this project are no harder than any other brioche project, but the bright pink pop of color turns this pony into a unicorn!

The magical part is that this intarsia is simpler and easier than plain intarsia. The yarns never have to be linked. If you are already able to work 2 color brioche stitch patterns, this is a great first pattern for the addition of intarsia.

Videos of each increase and decrease used in this pattern are available on YouTube.

If you haven’t tried any brioche stitch before, you may want to try a simple project first to learn the terminology.

Finished Size: 24” (61 cm) circumference and 13” (33 cm) tall.
Each repeat adds 3” (7.5 cm). Shown with 5 repeats of chevron
(green) brioche stitch.
Yarn: Plymouth Yarn Baby Alpaca Grande, 110 yards (101 m)
per 100g; 100% baby alpaca.
BC: 1 skein (90g used) Blue Ice Color 1285
FC 2: 1 skein (75g used) Cactus Color 3317
FC 1: 1 skein (25g used) Coral Color 6010
Needles: Size 10 (6 mm) 16” circular needles or size needed
to obtain gauge.
Gauge: 10.5 sts x 8 rows = 4 x 4” (10 x 10 cm) square in chevron
(green) brioche stitch.
Materials: Stitch marker, crochet hook, steamer, and blocking
mats.

Size Changes
Each added horizontal repeat increases the circumference of the cowl by 3” (7.5 cm). Vertical repeats are 3.5” (9 cm) tall. You’ll need additional skeins of BC and FC1 if you add repeats.

Yarn Substitutions
This pattern is fully adjustable. If you decide to use a thinner yarn, simply add more repeats and work rows 1-8 a few more times. Remember that brioche uses a slightly smaller needle than the size on the label. Fingering - #4, DK - #5, and worsted - #6.

Lime Nut muffins are my favorite recipe from the Northwood Inn. They are very flavorful and rich, yet the tart citrus gives them a slightly tropical flavor that tastes like a summer vacation. The Lime Nut cowl features a unique spring stitch texture and tapered fit. A step by step spring stitch tutorial is included in the pattern and a video tutorial is available via youtube.

Finished Size: 13˝ tall (33 cm) and 26˝ tapering to 22”
(66-56 cm) in circumference
Yarn: Main Color: 1 skein Nooch Central Park Fingering, 400 yds (366 m) per 100g Shown in Brasil, Brasil.
Needles: Size 5 (3.75 mm) 24˝ circular needles,
Gauge: 22 sts x 28 rows = 4 x 4” (10 x 10 cm) square in stockinette stitch.
Other Materials: Stitch marker, tapestry needle.

The Puddle Jumping Cowl started as a short design challenge. Was it possible to design a simple project on a short flight to a teaching job? I didn’t have anything on my needles and had packed a single skein of self striping yarn. Three hours after boarding my flight, I landed with the first few rounds of this cowl finished.

This pattern works best with self striping yarn. The pattern is easy to memorize. It’s only 4 lines long. Markers will help you keep your place in each repeat as you work through the pattern.

This project is good for knitters who have tried increases and decreases and want to learn the Stacked Stitch technique.

These videos will help with the unfamiliar stitches in the pattern:
Stacked Increase
Stacked Decrease

Finished Size: 24, 30, 36” (61, 76, 91cm) in circumference and 14” (35cm) tall.

Yarn: 1 (2, 2) skeins of White Birch Fiber Arts self striping fingering weight yarn, 400 yards per 100g skein; 80% superwash merino, 20% nylon.
Gauge and size can be adjusted to work with any weight yarn.
Pattern contains suggestions for other yarns and weights and substitution guidance.

Needles: Size 4 and 5 (3.5 and 3.75mm) 32”circular needles, or size needed to obtain gauge.

Gauge: 2 stacks wide x 2 stacks high in patt = 3” x 2” (7.6 x 5 cm).

Other Materials: 1 stitch marker, 15+ locking stitch markers in a contrasting color, tapestry needle, pins, damp cloth, ironing board and steamer.

Sometimes you want a complex project to work on, but other times you just want to relax and watch a movie while you make some last minute holiday gifts. This pattern is for a brioche stitch (fisherman’s rib) scarf with tidy edges and an easy to memorize one line pattern.

Photos are included to demonstrate how to “knit 1 below”.

Yarn: 1.5 skeins of Madeline Tosh, Tosh Merino wool shown in Grasshopper

Supplies: 1 pair Size #10 (6 mm) needles
A crochet hook

Size: Finished measurements are approx. 6 x 78” (15 x 198 cm).

Gauge: 20 stitches = 6” in brioche stitch

This scarf is the best place to start if you are new to the stacked stitch technique. There are no ends to weave in because it is worked in self striping yarn. It has many markers to guide you through each row and the pattern is very forgiving of mistakes. If you have your eye on a complex pattern like Fox Paws, or the Lotus Challenge Shawl but want to start with something less daunting, this is the project for you.

I’ve made my scarf very long and narrow. It reminds me of the skinny scarves in the Missoni F/W 16 collection. This is a favorite accessory when paired with some 70s style clothes and mustard colored platforms, it just makes me feel tall and fashionable.

If you aren’t into the long skinny scarf or want to use a thinner yarn, there are instructions to change the width in the pattern. There are also helpful tips and a note on how to work this scarf in a solid colored yarn.

If you can get through this scarf, you’ll be ready to take on even the hardest of stacked stitch patterns.

Finished Size: 7.5 x 86” (19 x 218 cm) rectangle incl. “lobes”.
Yarn: 3 skeins Noro Kureyon Air, 109 yards (100m) per 100g. Shown in color 263.
Needles: Size 15 (10mm) 24” circular needles or size needed to obtain gauge.
Gauge: 3 rows in patt = 7.5 x 9” (19 x 23 cm) including “lobes”
Other Materials: 5 stitch markers, Tapestry needle.

The Skyscraper Scarf is inspired by contemporary architecture and the unconventional shapes and materials that are used in the design of new towers in cities all over the world. The skyscraper is half striped and half solid to mimic the contrast of slatted and shiny surfaces. The changing grain of the fabric and tapered shape gives it a slight illusion of 3d perspective.

The scarf is constructed in 2 parts. First, the striped triangle is knit on the bias. Stitches are then picked up along the longest edge of the piece to create a solid colored triangle. Photo instructions of picking up stitches are included in the pattern. This half of the scarf is formed using easy short rows (the kind where you just turn in the middle of the row and don’t use any fancy technique) with an extra large eyelet punctuating the end of each short row.

This pattern was originally published in 2015 as part of the Innerloop Accessory club for Neighborhood Fiber Co.

Finished Size: 80” (203 cm) long, 13” (33 cm) wide end, 7” (18 cm) narrow end
Yarn: Neighborhood Fiber Co. Studio DK, 100% wool, 275 yards (251 m) per 4 oz.
Color A: 1 skein Thomas Circle
Color B: 1 skein Charles Centre
Color C: 1 skein Belair
Needles: Size 7 (4.5 mm) 40” circular needles or size needed to obtain gauge.
Gauge: 16 sts x 32 rows = 4 x 4” (10 x 10 cm) square in garter stitch.
Materials: Tapestry needle, blocking mats and pins.

This project is a gentle introduction to brioche intarsia colorwork. The wavy colorblocking was inspired by the path a skier leaves in the snow as they make their way down a mountain.

If you already know 2-color brioche, you may find the intarsia color changes in brioche stitch to be easier than they are in stockinette stitch! The pattern uses simple brioche increases and decreases to change the ratio of the colors on each side of the wave. The shaping instructions are simple and easy to memorize so you can focus on learning the intarsia technique.

Videos of each increase and decrease used in this pattern are available on YouTube.

If you haven’t tried any brioche stitch before, you may want to try a simple project first to learn the terminology.

Finished Size: 8.5” (21 cm) wide and 60” (152 cm) long.
Yarn: MollyGirl Yarn Harmony, 270 yards (247 m) per 100g; 100% merino wool.
Light Color 1: 1 skein (50g used) Between Halloweens
Light Color 2: 1 skein (50g used) House of the Rising Sun
Dark Color: 1 skein Stop Wondering
-A note on yarn substitution-
Harmony is a chainette yarn. Instead of a traditional twisted construction, it is made of a long chain of knitting. This type of yarn is extra springy, light, and warm. Each skein also contains more yardage than a standard yarn in the same weight.
If you do not use a chainette yarn, get an extra Dark Color skein. You may also need a smaller needle size to obtain gauge.

Needles: Size 10 (6 mm) circular needles or size needed to obtain gauge.
Gauge: 18 sts x 16 rows = 4 x 4” (10 x 10 cm) square in brioche stitch.
Materials: Crochet hook, stitch marker, blocking surface, steamer.

This pattern uses stacked increases and decreases to create the wavy colorwork. This means that it is very elastic and has no strands on the wrong side. This pattern is a great intro to this technique if you have never tried it. Videos of stacked increases and decreases are available on youtube. A video for the special 3-7 increase is also available.

If you aren’t sure about your color choices and feel a little lost, print out the coloring page and try them out. It’s a great planning tool.

Finished Size: 72” x 14˝ (182 x 35 cm)
Yarn: Woolbearers Fingering Wool, 273 yards (250 m) per 50 g.
Main Color: 2 skeins, shown in Lemon Drop.
Contrast Color A: 1 skein, shown in Key Lime.
Contrast Color B: 1 skein, shown in Fuchsia.
Contrast Color C: 1 skein, shown in Canteloupe.
Contrast Color D: 1 skein, shown in Iris.
Kits are available via Woolbearers

Needles: Size 5 (3.75 mm) 24˝ circular needles, or size needed to obtain gauge.
Gauge: Swatch in patt starting with 29 sts. Rep Rows 1-22 only twice and bind off. Swatch should measure 11” x 5˝ (28 x 13 cm) after blocking.
Other Materials: Stitch markers, sewing needle, blocking surface, pins.

Along the Atlantic shore, there are always surfers and other water sports enthusiasts out having fun on the ocean waves. This shawl, knit in the shape of a surfboard, is a fun and sporty accessory with a summer vibe.

Finished Size: 82” (182 cm) wide and 13.5” (34 cm) deep almond shape.

Yarn: Main Color: 1 skein Mollygirl Yarns Harmony, 270 yards (247 m) per 100g. (shown in color Giants)
Contrast Color: 1 skein Mollygirl Yarns Harmony, 270 yards (247 m) per 100g. (shown in color The Safety Dance)

Needles: Size 10 (6mm) 60” circular needles, or size needed to obtain gauge.

Gauge: 18 sts x 36 rows = 4 x 4” (10 x 10 cm) square in garter stitch after blocking.

Other Materials: Steamer, tapestry needle, pins for blocking (optional).

Cast on begins in center and shawl is worked from the center out. The method used for this special cast on is shown here. The shawl is then worked from the center out using short rows to create interesting color effects.

Limestone is a cowl with a reversible slip stitch pattern that
creates a striped pattern on one side and a nearly solid color on
the other.

Yarn: 2 contrasting skeins of Manos del Uruguay Maxima (shown
in colors highlighter and foil) or another worsted weight yarn.

Needles: Size 9 (5.5 mm) circular needles 24”

Other Materials: A sewing needle, a stitch marker.

Gauge: 18 stitches and 36 rows for a 4” square of pattern stitch.

Finished Size: 44” around and 7.5” tall.

I was listening to spellbound by Siouxie and the Banshees and had this idea for something punk-ish and cropped.

Spellbound is a summery tee with a laddered v-neck which can be worn in the front or the back. The alternate side is a plain crew neck. It is knit in two pieces with shaping in the shoulders. The silhouette is inspired by an old cutoff tee, well worn and loved. Instructions for a longer, fitted, babydoll style bodice are included as well.

Bust Measurement (from body, sizing is based on this): XS (30-32”), S (34-36”), M (38-40”), L (42-44”)

Width: XS (14”), S (16”), M (18”), L (20”)
Length: XS(19”), S ( 19.5”), M (20”), L (20.5”)

Yardage: XS-580, S-680, M-780, L-890 Add 70 yards if using alternate bodice.

Yarn: Patons Grace or another sport weight cotton. See chart for yardage allow an additional 70 yards for alternate bodice.

Needles: Size 6 (4mm) needles.

Gauge: 22 stitches and 28 rows for a 4” square of stockinette stitch.

Other Materials: Row counter, sewing needle, 2 stitch holders, 2 markers.

The Ripple Effect Wrap is an openwork scarf or shawl perfect for adding color and texture to your summer wardrobe while you to stay cool. The unique stitch work is made using an easy i-cord technique called Lattice Knitting. You can learn the basic technique and find more info in these YouTube lessons. The net-like fabric does not use a lot of yardage; a scarf requires only a single skein. With two skeins, you can make a large wrap, ideal for the beach.

Finished Size: 11 (17.5)“ 8, 44.5 cm wide and 64 (76)” 152, 193 cm long rectangle
Yarn: 1 or 2 skeins Lang Sol Dégradé, 218 yards (199 meters) per 100g; 100% cotton. Shown in small size in color 59
Needles: Size 8 (5mm) needles, or size needed to obtain gauge
Gauge: Gauge is explained in pattern.
Other Materials: Blocking surface, steamer, pins, tapestry needle

Skills used in pattern: Knit, KFB, K2tog, Slip sts back, This pattern does not have any purled sts.

The use of a gradient yarn in this easy to wear cardigan is inspired by the morning sunrise over the Atlantic Ocean. The drapey fit is easy to wear on a cool beach evening over a light tank or over a long sleeve tee as the weather transitions into fall

This dishcloth or washcloth is a fun representation of the daily weather. Knit from the center out, the sun is knit in 2 colors, highlighting the unique shaping in each section and bringing a bit of sunshine into your daily chores.
Videos for stacked increases are available on youtube. A photo tutorial showing how to cast on from the center out is included in the pattern.

Finished Size: 10.5” (26.5 cm) in diameter Including points.
Yarn: MC - Lily Sugar’n Cream Solids, 120 yards (110m) per 2.5 oz; 100% cotton. Shown in color 10 Yellow.
CC - Lily Sugar’n Cream Solids, 120 yards (110m) per 2.5 oz; 100% cotton. Shown in color 1628 Hot Orange.
Needles: Size 7 (4.5mm) double pointed needles (set of 5) and
Size 7 (4.5mm) 16” (40 cm) circular needles or size needed to obtain gauge.
Gauge: 18 sts and 28 rows for a 4 x 4” (10 x 10cm) square in stockinette stitch.
Other Materials: Sewing needle.

Along the Atlantic shore, there are always surfers and other water sports enthusiasts out having fun on the ocean waves. This shawl, knit in the shape of a surfboard, is a fun and sporty accessory with a summer vibe.

Finished Size: 82” (182 cm) wide and 13.5” (34 cm) deep almond shape.

Yarn: Main Color: 1 skein Mollygirl Yarns Harmony, 270 yards (247 m) per 100g. (shown in color Giants)
Contrast Color: 1 skein Mollygirl Yarns Harmony, 270 yards (247 m) per 100g. (shown in color The Safety Dance)

Needles: Size 10 (6mm) 60” circular needles, or size needed to obtain gauge.

Gauge: 18 sts x 36 rows = 4 x 4” (10 x 10 cm) square in garter stitch after blocking.

Other Materials: Steamer, tapestry needle, pins for blocking (optional).

Cast on begins in center and shawl is worked from the center out. The method used for this special cast on is shown here. The shawl is then worked from the center out using short rows to create interesting color effects.

Tattersall is a popular tartan for shirts and blankets. It is characterized by a grid of evenly spaced thin stripes, generally in two alternating colors, on a solid background. This pattern was popularized by blankets from the Tattersall Horse Market in London. Like a woven plaid, the Tattersall pattern in this cowl is created with the intersection of two yarn colors.

If you already know 2-color brioche, you may find the intarsia color changes in brioche stitch to be easier than they are in stockinette stitch! Stripes and intarsia create the intermeshed vertical and horizontal stripes of the plaid. This project is a gentle introduction to brioche intarsia in the round. At first, it’s a little tricky, but this simple plaid is easy to memorize as you focus on the new techniques. The pattern has written and charted instructions, a brioche intarsia primer with some helpful tips and a photo guide to help you get started on the first few rounds.

If you haven’t tried any brioche stitch before, you may want to try a simple project first to learn the terminology.

Finished Size: 26.5” (63 cm) in circumference, 16” (40 cm) tall.
Yarn: Harrisville Designs Shetland, 217 yards (198 m) per 50g; 100% wool.
Main Color: 2 skeins Peacock
Contrast Color 1: 1 skein Gold
Contrast Color 2: 1 skein Raspberry
Needles: Size 3 (3.25 mm) 24” circular needles or size needed to obtain gauge.
Gauge: 18 sts x 26 rows = 4 x 4” (10 x 10 cm) square in brioche stitch.
Materials: A scale accurate to the gram, stitch markers, 20 cardboard or plastic bobbins, a crochet hook, blocking mats and pins.

Thick & Thin hat and scarf are celebrate the natural beauty of hand knits. The contrast of scale and simple geometry make both of these accessories classic with just enough interest to hold your attention.

Both of these accessories are knit with both worsted and super bulky yarn, creating a very unusual magnifying glass type effect. You can choose to match the colors and tell a texture story, or to switch it up and color block as well. As a plus, after making it half way through each project, just as you start to wish you could knit faster, you get to switch to size 15 needles.

Yarn A: Brown Sheep Lanaloft Worsted
or any worsted weight yarn
Scarf - 200 yards
Hat - 100 yards
Yarn B: Brown Sheep Burly Spun
or equivalent such as Lion Brand Thick and Quick or Cascade Magnum
Scarf - 100 yards
Hat - 30 yards

Needle A: Size 10 (6mm) 36” circular needles
And double pointed 10s to start hat.
Needle B: Size 15 (10mm) 36” circular needles

Gauge for yarn A: 24 stitches and 22 rows for a 4” square of K1, P1 ribbing.
Gauge for yarn B: 12 stitches and 10 rows for a 4” square of K1, P1 ribbing.

An any season scarf knit in the shape of a lightning bolt. Combining neon yarn with a speckled color can have a shocking result. If you do not want to hold 2 yarns together, substitute with a DK or Sport weight yarn for a single stranded version, or even double up on a fingering weight yarn for a heavy weight, warmer winter scarf.

Yarn: 2 skeins Madelinetosh Prairie, 840 yards (768 m) Shown in colors Optic and Edison Bulb held at once.
Substitute with one strand of DK weight yarn (800 yards)

Needles: Size 8 (5mm) 32˝ circular needles, or size needed to obtain drapey fabric.

Gauge: 20 sts and 34 rows in garter stitch = 4 x 4˝ (10 x 10 cm) square.

Other Materials: Sewing needle, pins, blocking surface.

Thread the Needle is a quick, fun, and unpredictable cowl, presented to you as a mini MKAL. The pattern contains some texture and colorwork elements inspires by hand sewing. It is a very versatile and wearable but unusual shape. Trust me when I tell you this is the cowl shape you’ve been missing all your knitting life. It also has an interesting, satisfying construction and is knitted flat… well you’ll see how it works.

This is a “mini MKAL”
Meaning you only need a large skein, a mini skein, and 3 weeks to participate. You won’t need to spend too much time finding your yarn (stash dive) and the project won’t take all season to finish. You’ll still have time and money to knit other exciting patterns this season. I’m always hesitant to make a big investment on a mystery project, and with this one, you don’t need to worry.

Note: Cowl is an unconventional shape and can be worn more than one way. The measurements reflect the unusual shape. Don’t try to guess, it’s part of the mystery.
Finished Size: 40 ˝ (102 cm) long and 9˝ (23 cm) tall.
Yarn: Yarn: Madelinetosh Tosh Merino Light.
MC: 1 skein, 420 yards/100g (384m/100g) Astrid Grey
CC: 1 Unicorn Tail 52 yards (48 m) Neon Peach
Needles: Size 7 (4.5mm) 32˝ circular needles, or size needed to obtain gauge.
Gauge: 19 sts x 24 rows = 4 x 4” (10 x 10 cm) square in stockinette stitch.
Other Materials: Markers, tapestry needle, steamer for blocking.
Skills: This pattern contains slipped stitches, twisted stitches, increases, decreases, and a knitted seam (a video demo will be available alongside this clue).

Choosing yarn
You will need fingering weight yarn in two colors - one full skein and one approximately 50 yard/meter mini skein. I used Madelinetosh Tosh Merino Light because it is easy to find in the full skeins and the mini size, but you can use almost any fingering weight yarn. Scraps are great for the contrasting color if you do not have access to mini skeins.
The two colors that you pick should have good contrast. My CC is neon because I really want it to stand out. It is best that at least one of them be a solid color. If you like variegated, speckle, gradient, or self striping yarns, choose one and pair it with a strongly contrasting solid. I recommend keeping the CC in a solid unless you pick a multicolored yarn with a very strong contrast against your MC

This shawl uses the shaping and colorwork properties of brioche stitch to create an image of lightning.

This pattern is best suited for knitters with a good understanding of simple brioche stitch and are ready to take their skill to the next level.

Finished Size: 73” (92”) / 185 (234) cm x 21” (27”) / 53 (69) cm triangle shape.
Yarn: 400 (630) yards / 365 (575) m of fingering weight yarn in 2 colors. Small size is specifically designed to use one 100g skein of each color.

MC - MollyGirl Yarn Glamour Lite, 450 yards / 411m per 100g; 75% superwash merino, 25% Nylon. Shown in color Life on Mars.
CC - MollyGirl Yarn Boogie Woogie, 435 yards / 398m per 100g; 85% superwash merino, 15% Nylon. Shown in color Under Pressure.

Needles: Size 5 (3.75mm) needles or size needed to obtain gauge.
Gauge: 14 sts x 26 rows = 4 x 4” (10 x 10 cm) square in brioche stitch.
Other Materials: Tapestry needle, 2 stitch markers, pins, blocking surface.

With the right stripe pattern, any two yarns can seamlessly fade together. But that doesn’t make it any easier to find a pair that you like. The added strand of mohair ensures that even the strangest combinations have something in common. This project combines the unique, soft texture and halo of mohair with other yarns. The result is a fabric that looks almost as if it is glowing. Adding a strand of mohair to any project can mellow out harsh color contrasts and make the whole palette more harmonious. The hazy halo also helps obscure any hard edges and awkward color transitions. The photo of my shawl contrasted against the plain skein of blue sock yarn shows how the single strand of chartreuse mohair tints the final project.

Knit on size 9 needles, this is a quick project that provides enough warmth for winter wear. The Tinted Triangle is a good intermediate level project. It contains a few types of increases for the shaping and the colorwork is formed with stripes.

Finished Size: 78” (198 cm) wide and 22” (55 cm) deep triangle.
Yarn: Mohair - 2 Skeins of Neighborhood Fiber Co. Loft, 350 yards (320m) per 1 oz skein; 60% Mohair, 40% Silk.
Shown in Belair.
Colors A and B - 2 colors of Neighborhood Fiber Co. Studio Sock, 400 yards (366m) per 4 oz skein; 100% merino wool.
Shown in Olde Towne East and Spice Market.
Needles: #9 (5.5 mm) circular needles with a 32” (81 cm) cord.
Gauge: 11.5 sts x 30 rows = 4 x 4” (10 x 10 cm) square in garter stitch with 1 strand of Mohair and 2 strands of Studio Sock.
Materials: Row counter, stitch marker, tapestry needle, pins, steamer, and blocking wires.

Thick & Thin hat and scarf are celebrate the natural beauty of hand knits. The contrast of scale and simple geometry make both of these accessories classic with just enough interest to hold your attention.

Both of these accessories are knit with both worsted and super bulky yarn, creating a very unusual magnifying glass type effect. You can choose to match the colors and tell a texture story, or to switch it up and color block as well. As a plus, after making it half way through each project, just as you start to wish you could knit faster, you get to switch to size 15 needles.

Yarn A: Brown Sheep Lanaloft Worsted
or any worsted weight yarn
Scarf - 200 yards
Hat - 100 yards
Yarn B: Brown Sheep Burly Spun
or equivalent such as Lion Brand Thick and Quick or Cascade Magnum
Scarf - 100 yards
Hat - 30 yards

Needle A: Size 10 (6mm) 36” circular needles
And double pointed 10s to start hat.
Needle B: Size 15 (10mm) 36” circular needles

Gauge for yarn A: 24 stitches and 22 rows for a 4” square of K1, P1 ribbing.
Gauge for yarn B: 12 stitches and 10 rows for a 4” square of K1, P1 ribbing.

This basic recipe for an almond shaped wrap is worked from the center out in a self-striping yarn. The shape falls somewhere between an oval and a crescent and it can be worn as a scarf or shawl depending on the finished size. I’m in love with the versatility and adjustability of this pattern especially for use with handspun yarn.

The sample uses one oversized cake of Jill Draper Makes Stuff Rifton. This unusual yarn is milled from natural colored wool and dyed-in-the-wool colors and is 100% grown and spun in the USA. I picked up my cake at Jill’s open studio at Rhinebeck in 2016. The yarn is a bit loftier than a traditional fingering weight yarn, so you may want to adjust your gauge accordingly when substituting yarns. The advantage of using Rifton is the size of the skein. Each cake contains 600 yards of yarn - enough to make a full sized project.

Cast on begins in center and shawl is worked from the center out. Cast on using method demonstrated at this link and is similar to the long tail cast on.

Essential Info

Finished Size: 88” (224 cm) long and 20” (51 cm) deep.
Yarn: Jill Draper Makes Stuff Rifton, 600 yards (549m) per 184g; 100% wool. Shown in color Autumn.
Needles: Size 8 (5mm) 60” (150 cm) circular needles or size needed to obtain gauge.
Gauge: 12 sts and 32 rows for a 4 x 4” (10 x 10cm) square in stockinette stitch.
Other Materials: Sewing needle, 10 stitch markers - 2 in a contrasting color used as End Markers.

The Hudson Valley is one of the most beautiful places in the United States. In the autumn, people come from all over the world to see the colorful foliage, enjoy the mild weather, and to relax in nature.

Skills
This pattern contains increases, decreases, slipped stitches, lacework and stacked stitches. If you have never tried stacked stitches, it is a good idea to look at this online video tutorial:
Stacked Increase Video
Stacked Decrease Video
Some clues may have their own video guides to help you out. These will be posted as the clues are released.

Finished Size: 84” (213 cm) wide x 23” (58 cm) deep crescent shape.

Yarn: Jill Draper Makes Stuff Mohonk, 370 yards (338 m) per 4 oz skein; 100% wool.
3 contrasting color skeins

Needles: Size 8 (5mm) needles, or size needed to obtain gauge.

Gauge: 14 sts x 22 rows = 4 x 4” (10 x 10 cm) square in stockinette stitch.

Picking yarn
You will need sport or DK weight yarn in three colors. I recommend using the recommended Mohonk yarn from Jill Draper Makes Stuff.

Color A is your pop color. Whether you pick a highlight or lowlight, this is the color that should contrast with both Colors B and C. You will only need half a skein of this color.

Color B is your secondary color. it should be harmonious with Color C, but not too close to it. A solid color is best.

Color C is the star of the show. Though I prefer solid colors all around, this is where you may want to use a mildly variegated yarn. Make sure you like this color a lot, it’s the one we’ll be using most.

Trig Scarf is a modular scarf with a simple and fun construction. There’s no sewing or complicated colorwork. Knit in all garter stitch, each triangular section is simple enough to be relaxing, but short rows keep things interesting. This pattern is the easier, scarfier sibling of the Trig Wrap.

Instructions are for 3 colors, but as many as 13 colors can be used. Check out the coloring page image to plan out your colors.

Finished Size: 70” (178 cm) long and approx. 7” (18 cm) wide scarf.
See schematic on page 4 for details.

Yarn: Malabrigo Worsted approx. 210 yards/100g (192m/100g) per skein or equivalent.
Color A: 148 Holly Hock, 65g, 136 yards (124m)
Color B: 607 Vetiver, 90g, 190 yards (172m)
Color C: 621 Deja Vu, 65g, 136 yards (124m)
OR 55 yards (50m) for Triangle 7 and 35 yards (32m) per triangle for all others.

Needles: Size 10 (6mm) 60” (150 cm) circular needles, or size needed to obtain gauge.

Gauge: 18 sts x 36 rows = 4 x 4” (10 x 10 cm) square in garter stitch.

Other Materials: 2 markers, sewing needle, blocking materials of your choice.

I was shopping at a certain urban clothing store when I saw this turban. The idea was nice, but there was some bunching in odd places and the price was way off (for an acrylic hat) so I decided to make my own. Now this isn’t an exact copy of their design, it has some improvements to the fitting, a rounder shape, and fewer seams (more than the 6% deviation required by law). It does have the same vintage inspired, updates movie star style though.
Give it a go, the fisherman’s rib is super fast to knit and double thick for warmth.

This cowl is not at all like other fade projects. The fade from one yarn to another creates an incredible textural shift in the fabric from velvety, luxurious mohair into the smooth, soft merino wool. You don’t even need to use contrasting colors to get the full effect of this cowl, making it perfect for those who like an understated look. Of course, you can get as wild as you want with the color. When picking my colors, I found inspiration in rose petals. At the edge of each red petal, there’s a sightly darker shade, making each petal look luminous. The result is a fabric that looks almost as if it is glowing.

This project is well suited for adventurous beginners who are able to knit, purl, and work in the round.There are no increases or decreases in the cowl. Its funnel like shape comes from changing yarns and needle size.

Finished Size: 24.5” (62 cm) in circumference at the top of the cowl, 40” (100 cm) in circumference at the bottom of the cowl, and 16” (41 cm) tall.
Yarn: MollyGirl Yarn Bass Line, 460 yards (421m) per 100g skein; 75% merino, 25% nylon. Shown in color Little Red Corvette.
MollyGirl Yarn Motown, 455 yards (416m) per 50g skein; 72% mohair, 28% silk. Shown in color Angie.
Needles: #8, 9, 10 (5, 5.5, 6 mm) circular needles with a 16” (40 cm) cord.
Gauge: 18 sts x 26 rows = 4 x 4” (10 x 10 cm) square in 1 x 1 rib with 2 strands of wool yarn held together on smallest needle.
Materials: Stitch marker, ball winder, row counter, steamer, tapestry needle, and a scale accurate to the gram.

Did you ever wonder what would happen if a pair of gloves and a scarf had a child? What would happen if you just reached into your scarf every time your fingers were cold?

Well this is the answer to those questions that you never actually asked.

Yarn: 300-400 yards of Cascade 220 wool (2 skeins) Fingers may be worked in contrasting color for a playful effect (about 70 yards).

Supplies: 1 pair Size #8 (5 mm) straight needles
4 Size #8 (5 mm) double pointed needles
Scrap yarn for holding stitches (hard holders not recommended)
A sewing needle

Size: This scarf fits teens and adults with a hand circumference of 6 - 9” (15 - 23 cm).
Finished measurements are 6 x 70” (15 x 178 cm).

Gauge: 4” x 4” square of stockinette stitch = 16 stitches x 22 rows.

You will want to know how to knit, purl, increase, decrease, use a provisional cast on

This scarf has a slight 3D illusion. Stripes provide color contrast; shaping creates the chevron pattern; and the final addition of short rows changes the thickness of each stripe. As the stripes become thick and thin, they almost appear to pop forward off the scarf. As a bonus, the Parakeet (green) color is UV reactive and glows under blacklight.

Find helpful video tutorials for this project at http://ow.ly/ZmQz30fB9mA

Finished Size: 9.5” (24 cm) x 72” (183 cm) rectangular shape.
Yarn: 1 skein each in 2 colors Anzula Squishy, 385 yards (352 m) per 4 oz (114g) skein (80% merino, 10% cashmere, 10% nylon). Shown in colors Fiona and Parakeet.
Needles: #5 (3.75 mm) needles, or size needed to obtain gauge.
Gauge: 20 stitches and 36 rows = 4 x 4” (10 x 10 cm) square in garter stitch after blocking.
Materials: Stitch markers, yarn needle, pins, blocking wires, blocking surface, steamer.

Knit on the bias, this bold striped pattern showcases the interplay of a solid color against a shifting ground. In these colors, the scarf reminds me of a busy city highway under construction. The stripes, chevrons, and short rows come together to create a geometric pattern free of any strands on the reverse side, good enough to wear inside out.

This project has 2 sets of instructions with different advantages:
Knit/Purl – the edges are neater when the pattern is worked with some purl rows. In this version, the yarns travel up opposite sides of the work and do not need to break.
All Knit – in this option, long loops are formed from carrying Color B up the side of the work or Color B breaks after each stripe and ends are woven in as you go. There is no purling in this version, but it is not as neat looking.
Sample is worked using knit/purl instructions.

Find helpful video tutorials at http://ow.ly/ZmQz30fB9mA

Finished Size: 9.5” (24 cm) x 74” (188 cm) rhombus shape.
Yarn: Color A - Knitwhits Freia Handpaints Semi-Solid Shawl Ball, 430 yards (393 meters) per 100g skein (100% US cruelty-free merino). Shown in colorway Tobiko.
Color B - Knitwhits Freia Handpaints Flux Shawl Ball, 430 yards (393 meters) per 100g skein (100% US cruelty-free merino). Shown in colorway Punk Rock.
Needles: #6 (4 mm) 24” (60 cm) circular needles for Knit/Purl version, #6 (4 mm) for All Knit version, or size needed to obtain gauge.
Gauge: 22 stitches and 40 rows= 4 x 4” (10 x 10 cm) square in garter stitch after blocking.
Materials: Yarn needle, pins, steamer, blocking wires, blocking surface.

This hat is a hybrid of two vintage styles: the cloche and the turban. Inspired by the 1920s, it has an old style feel but is not too out of place in our postmodern world. When worn with the gathering on the sides, it looks like a cloche, with a close fitting bell shape. When turned 90 degrees so the gathering is in the front, it looks more like a turban.
Pattern Stats
Size: The pattern covers heads from 14” - 22” in diameter and instructions for a two tone colorblocked version are included.
Yarn: Any worsted weight yarn, the pattern uses Berocco Flicker.
Gauge: 20 sts x 24 rows = 4 x 4" (10 x 10 cm) square of stockinette stitch.